ZerethShell
File Manager
SQL Manager
/
usr
/
share
/
snmp
/
mibs
IP-MIB.txt
IP-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Integer32, Counter32, IpAddress, mib-2, Unsigned32, Counter64, zeroDotZero FROM SNMPv2-SMI PhysAddress, TruthValue, TimeStamp, RowPointer, TEXTUAL-CONVENTION, TestAndIncr, RowStatus, StorageType FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF InetAddress, InetAddressType, InetAddressPrefixLength, InetVersion, InetZoneIndex FROM INET-ADDRESS-MIB InterfaceIndex FROM IF-MIB; ipMIB MODULE-IDENTITY LAST-UPDATED "200602020000Z" ORGANIZATION "IETF IPv6 MIB Revision Team" CONTACT-INFO "Editor: Shawn A. Routhier Interworking Labs 108 Whispering Pines Dr. Suite 235 Scotts Valley, CA 95066 USA EMail: <sar@iwl.com>" DESCRIPTION "The MIB module for managing IP and ICMP implementations, but excluding their management of IP routes. Copyright (C) The Internet Society (2006). This version of this MIB module is part of RFC 4293; see the RFC itself for full legal notices." REVISION "200602020000Z" DESCRIPTION "The IP version neutral revision with added IPv6 objects for ND, default routers, and router advertisements. As well as being the successor to RFC 2011, this MIB is also the successor to RFCs 2465 and 2466. Published as RFC 4293." REVISION "199411010000Z" DESCRIPTION "A separate MIB module (IP-MIB) for IP and ICMP management objects. Published as RFC 2011." REVISION "199103310000Z" DESCRIPTION "The initial revision of this MIB module was part of MIB-II, which was published as RFC 1213." ::= { mib-2 48} -- -- The textual conventions we define and use in this MIB. -- IpAddressOriginTC ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The origin of the address. manual(2) indicates that the address was manually configured to a specified address, e.g., by user configuration. dhcp(4) indicates an address that was assigned to this system by a DHCP server. linklayer(5) indicates an address created by IPv6 stateless auto-configuration. random(6) indicates an address chosen by the system at random, e.g., an IPv4 address within 169.254/16, or an RFC 3041 privacy address." SYNTAX INTEGER { other(1), manual(2), dhcp(4), linklayer(5), random(6) } IpAddressStatusTC ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The status of an address. Most of the states correspond to states from the IPv6 Stateless Address Autoconfiguration protocol. The preferred(1) state indicates that this is a valid address that can appear as the destination or source address of a packet. The deprecated(2) state indicates that this is a valid but deprecated address that should no longer be used as a source address in new communications, but packets addressed to such an address are processed as expected. The invalid(3) state indicates that this isn't a valid address and it shouldn't appear as the destination or source address of a packet. The inaccessible(4) state indicates that the address is not accessible because the interface to which this address is assigned is not operational. The unknown(5) state indicates that the status cannot be determined for some reason. The tentative(6) state indicates that the uniqueness of the address on the link is being verified. Addresses in this state should not be used for general communication and should only be used to determine the uniqueness of the address. The duplicate(7) state indicates the address has been determined to be non-unique on the link and so must not be used. The optimistic(8) state indicates the address is available for use, subject to restrictions, while its uniqueness on a link is being verified. In the absence of other information, an IPv4 address is always preferred(1)." REFERENCE "RFC 2462" SYNTAX INTEGER { preferred(1), deprecated(2), invalid(3), inaccessible(4), unknown(5), tentative(6), duplicate(7), optimistic(8) } IpAddressPrefixOriginTC ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The origin of this prefix. manual(2) indicates a prefix that was manually configured. wellknown(3) indicates a well-known prefix, e.g., 169.254/16 for IPv4 auto-configuration or fe80::/10 for IPv6 link-local addresses. Well known prefixes may be assigned by IANA, the address registries, or by specification in a standards track RFC. dhcp(4) indicates a prefix that was assigned by a DHCP server. routeradv(5) indicates a prefix learned from a router advertisement. Note: while IpAddressOriginTC and IpAddressPrefixOriginTC are similar, they are not identical. The first defines how an address was created, while the second defines how a prefix was found." SYNTAX INTEGER { other(1), manual(2), wellknown(3), dhcp(4), routeradv(5) } Ipv6AddressIfIdentifierTC ::= TEXTUAL-CONVENTION DISPLAY-HINT "2x:" STATUS current DESCRIPTION "This data type is used to model IPv6 address interface identifiers. This is a binary string of up to 8 octets in network byte-order." SYNTAX OCTET STRING (SIZE (0..8)) -- -- the IP general group -- some objects that affect all of IPv4 -- ip OBJECT IDENTIFIER ::= { mib-2 4 } ipForwarding OBJECT-TYPE SYNTAX INTEGER { forwarding(1), -- acting as a router notForwarding(2) -- NOT acting as a router } MAX-ACCESS read-write STATUS current DESCRIPTION "The indication of whether this entity is acting as an IPv4 router in respect to the forwarding of datagrams received by, but not addressed to, this entity. IPv4 routers forward datagrams. IPv4 hosts do not (except those source-routed via the host). When this object is written, the entity should save the change to non-volatile storage and restore the object from non-volatile storage upon re-initialization of the system. Note: a stronger requirement is not used because this object was previously defined." ::= { ip 1 } ipDefaultTTL OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The default value inserted into the Time-To-Live field of the IPv4 header of datagrams originated at this entity, whenever a TTL value is not supplied by the transport layer protocol. When this object is written, the entity should save the change to non-volatile storage and restore the object from non-volatile storage upon re-initialization of the system. Note: a stronger requirement is not used because this object was previously defined." ::= { ip 2 } ipReasmTimeout OBJECT-TYPE SYNTAX Integer32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of seconds that received fragments are held while they are awaiting reassembly at this entity." ::= { ip 13 } -- -- the IPv6 general group -- Some objects that affect all of IPv6 -- ipv6IpForwarding OBJECT-TYPE SYNTAX INTEGER { forwarding(1), -- acting as a router notForwarding(2) -- NOT acting as a router } MAX-ACCESS read-write STATUS current DESCRIPTION "The indication of whether this entity is acting as an IPv6 router on any interface in respect to the forwarding of datagrams received by, but not addressed to, this entity. IPv6 routers forward datagrams. IPv6 hosts do not (except those source-routed via the host). When this object is written, the entity SHOULD save the change to non-volatile storage and restore the object from non-volatile storage upon re-initialization of the system." ::= { ip 25 } ipv6IpDefaultHopLimit OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The default value inserted into the Hop Limit field of the IPv6 header of datagrams originated at this entity whenever a Hop Limit value is not supplied by the transport layer protocol. When this object is written, the entity SHOULD save the change to non-volatile storage and restore the object from non-volatile storage upon re-initialization of the system." REFERENCE "RFC 2461 Section 6.3.2" ::= { ip 26 } -- -- IPv4 Interface Table -- ipv4InterfaceTableLastChange OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime on the most recent occasion at which a row in the ipv4InterfaceTable was added or deleted, or when an ipv4InterfaceReasmMaxSize or an ipv4InterfaceEnableStatus object was modified. If new objects are added to the ipv4InterfaceTable that require the ipv4InterfaceTableLastChange to be updated when they are modified, they must specify that requirement in their description clause." ::= { ip 27 } ipv4InterfaceTable OBJECT-TYPE SYNTAX SEQUENCE OF Ipv4InterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table containing per-interface IPv4-specific information." ::= { ip 28 } ipv4InterfaceEntry OBJECT-TYPE SYNTAX Ipv4InterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing IPv4-specific information for a specific interface." INDEX { ipv4InterfaceIfIndex } ::= { ipv4InterfaceTable 1 } Ipv4InterfaceEntry ::= SEQUENCE { ipv4InterfaceIfIndex InterfaceIndex, ipv4InterfaceReasmMaxSize Integer32, ipv4InterfaceEnableStatus INTEGER, ipv4InterfaceRetransmitTime Unsigned32 } ipv4InterfaceIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index value that uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of the IF-MIB's ifIndex." ::= { ipv4InterfaceEntry 1 } ipv4InterfaceReasmMaxSize OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The size of the largest IPv4 datagram that this entity can re-assemble from incoming IPv4 fragmented datagrams received on this interface." ::= { ipv4InterfaceEntry 2 } ipv4InterfaceEnableStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The indication of whether IPv4 is enabled (up) or disabled (down) on this interface. This object does not affect the state of the interface itself, only its connection to an IPv4 stack. The IF-MIB should be used to control the state of the interface." ::= { ipv4InterfaceEntry 3 } ipv4InterfaceRetransmitTime OBJECT-TYPE SYNTAX Unsigned32 UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The time between retransmissions of ARP requests to a neighbor when resolving the address or when probing the reachability of a neighbor." REFERENCE "RFC 1122" DEFVAL { 1000 } ::= { ipv4InterfaceEntry 4 } -- -- v6 interface table -- ipv6InterfaceTableLastChange OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime on the most recent occasion at which a row in the ipv6InterfaceTable was added or deleted or when an ipv6InterfaceReasmMaxSize, ipv6InterfaceIdentifier, ipv6InterfaceEnableStatus, ipv6InterfaceReachableTime, ipv6InterfaceRetransmitTime, or ipv6InterfaceForwarding object was modified. If new objects are added to the ipv6InterfaceTable that require the ipv6InterfaceTableLastChange to be updated when they are modified, they must specify that requirement in their description clause." ::= { ip 29 } ipv6InterfaceTable OBJECT-TYPE SYNTAX SEQUENCE OF Ipv6InterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table containing per-interface IPv6-specific information." ::= { ip 30 } ipv6InterfaceEntry OBJECT-TYPE SYNTAX Ipv6InterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing IPv6-specific information for a given interface." INDEX { ipv6InterfaceIfIndex } ::= { ipv6InterfaceTable 1 } Ipv6InterfaceEntry ::= SEQUENCE { ipv6InterfaceIfIndex InterfaceIndex, ipv6InterfaceReasmMaxSize Unsigned32, ipv6InterfaceIdentifier Ipv6AddressIfIdentifierTC, ipv6InterfaceEnableStatus INTEGER, ipv6InterfaceReachableTime Unsigned32, ipv6InterfaceRetransmitTime Unsigned32, ipv6InterfaceForwarding INTEGER } ipv6InterfaceIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index value that uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of the IF-MIB's ifIndex." ::= { ipv6InterfaceEntry 1 } ipv6InterfaceReasmMaxSize OBJECT-TYPE SYNTAX Unsigned32 (1500..65535) UNITS "octets" MAX-ACCESS read-only STATUS current DESCRIPTION "The size of the largest IPv6 datagram that this entity can re-assemble from incoming IPv6 fragmented datagrams received on this interface." ::= { ipv6InterfaceEntry 2 } ipv6InterfaceIdentifier OBJECT-TYPE SYNTAX Ipv6AddressIfIdentifierTC MAX-ACCESS read-only STATUS current DESCRIPTION "The Interface Identifier for this interface. The Interface Identifier is combined with an address prefix to form an interface address. By default, the Interface Identifier is auto-configured according to the rules of the link type to which this interface is attached. A zero length identifier may be used where appropriate. One possible example is a loopback interface." ::= { ipv6InterfaceEntry 3 } -- This object ID is reserved as it was used in earlier versions of -- the MIB module. In theory, OIDs are not assigned until the -- specification is released as an RFC; however, as some companies -- may have shipped code based on earlier versions of the MIB, it -- seems best to reserve this OID. This OID had been -- ipv6InterfacePhysicalAddress. -- ::= { ipv6InterfaceEntry 4} ipv6InterfaceEnableStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The indication of whether IPv6 is enabled (up) or disabled (down) on this interface. This object does not affect the state of the interface itself, only its connection to an IPv6 stack. The IF-MIB should be used to control the state of the interface. When this object is written, the entity SHOULD save the change to non-volatile storage and restore the object from non-volatile storage upon re-initialization of the system." ::= { ipv6InterfaceEntry 5 } ipv6InterfaceReachableTime OBJECT-TYPE SYNTAX Unsigned32 UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The time a neighbor is considered reachable after receiving a reachability confirmation." REFERENCE "RFC 2461, Section 6.3.2" ::= { ipv6InterfaceEntry 6 } ipv6InterfaceRetransmitTime OBJECT-TYPE SYNTAX Unsigned32 UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The time between retransmissions of Neighbor Solicitation messages to a neighbor when resolving the address or when probing the reachability of a neighbor." REFERENCE "RFC 2461, Section 6.3.2" ::= { ipv6InterfaceEntry 7 } ipv6InterfaceForwarding OBJECT-TYPE SYNTAX INTEGER { forwarding(1), -- acting as a router notForwarding(2) -- NOT acting as a router } MAX-ACCESS read-write STATUS current DESCRIPTION "The indication of whether this entity is acting as an IPv6 router on this interface with respect to the forwarding of datagrams received by, but not addressed to, this entity. IPv6 routers forward datagrams. IPv6 hosts do not (except those source-routed via the host). This object is constrained by ipv6IpForwarding and is ignored if ipv6IpForwarding is set to notForwarding. Those systems that do not provide per-interface control of the forwarding function should set this object to forwarding for all interfaces and allow the ipv6IpForwarding object to control the forwarding capability. When this object is written, the entity SHOULD save the change to non-volatile storage and restore the object from non-volatile storage upon re-initialization of the system." ::= { ipv6InterfaceEntry 8 } -- -- Per-Interface or System-Wide IP statistics. -- -- The following two tables, ipSystemStatsTable and ipIfStatsTable, -- are intended to provide the same counters at different granularities. -- The ipSystemStatsTable provides system wide counters aggregating -- the traffic counters for all interfaces for a given address type. -- The ipIfStatsTable provides the same counters but for specific -- interfaces rather than as an aggregate. -- -- Note well: If a system provides both system-wide and interface- -- specific values, the system-wide value may not be equal to the sum -- of the interface-specific values across all interfaces due to e.g., -- dynamic interface creation/deletion. -- -- Note well: Both of these tables contain some items that are -- represented by two objects, representing the value in either 32 -- or 64 bits. For those objects, the 32-bit value MUST be the low -- order 32 bits of the 64-bit value. Also note that the 32-bit -- counters must be included when the 64-bit counters are included. ipTrafficStats OBJECT IDENTIFIER ::= { ip 31 } ipSystemStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF IpSystemStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table containing system wide, IP version specific traffic statistics. This table and the ipIfStatsTable contain similar objects whose difference is in their granularity. Where this table contains system wide traffic statistics, the ipIfStatsTable contains the same statistics but counted on a per-interface basis." ::= { ipTrafficStats 1 } ipSystemStatsEntry OBJECT-TYPE SYNTAX IpSystemStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A statistics entry containing system-wide objects for a particular IP version." INDEX { ipSystemStatsIPVersion } ::= { ipSystemStatsTable 1 } IpSystemStatsEntry ::= SEQUENCE { ipSystemStatsIPVersion InetVersion, ipSystemStatsInReceives Counter32, ipSystemStatsHCInReceives Counter64, ipSystemStatsInOctets Counter32, ipSystemStatsHCInOctets Counter64, ipSystemStatsInHdrErrors Counter32, ipSystemStatsInNoRoutes Counter32, ipSystemStatsInAddrErrors Counter32, ipSystemStatsInUnknownProtos Counter32, ipSystemStatsInTruncatedPkts Counter32, ipSystemStatsInForwDatagrams Counter32, ipSystemStatsHCInForwDatagrams Counter64, ipSystemStatsReasmReqds Counter32, ipSystemStatsReasmOKs Counter32, ipSystemStatsReasmFails Counter32, ipSystemStatsInDiscards Counter32, ipSystemStatsInDelivers Counter32, ipSystemStatsHCInDelivers Counter64, ipSystemStatsOutRequests Counter32, ipSystemStatsHCOutRequests Counter64, ipSystemStatsOutNoRoutes Counter32, ipSystemStatsOutForwDatagrams Counter32, ipSystemStatsHCOutForwDatagrams Counter64, ipSystemStatsOutDiscards Counter32, ipSystemStatsOutFragReqds Counter32, ipSystemStatsOutFragOKs Counter32, ipSystemStatsOutFragFails Counter32, ipSystemStatsOutFragCreates Counter32, ipSystemStatsOutTransmits Counter32, ipSystemStatsHCOutTransmits Counter64, ipSystemStatsOutOctets Counter32, ipSystemStatsHCOutOctets Counter64, ipSystemStatsInMcastPkts Counter32, ipSystemStatsHCInMcastPkts Counter64, ipSystemStatsInMcastOctets Counter32, ipSystemStatsHCInMcastOctets Counter64, ipSystemStatsOutMcastPkts Counter32, ipSystemStatsHCOutMcastPkts Counter64, ipSystemStatsOutMcastOctets Counter32, ipSystemStatsHCOutMcastOctets Counter64, ipSystemStatsInBcastPkts Counter32, ipSystemStatsHCInBcastPkts Counter64, ipSystemStatsOutBcastPkts Counter32, ipSystemStatsHCOutBcastPkts Counter64, ipSystemStatsDiscontinuityTime TimeStamp, ipSystemStatsRefreshRate Unsigned32 } ipSystemStatsIPVersion OBJECT-TYPE SYNTAX InetVersion MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP version of this row." ::= { ipSystemStatsEntry 1 } -- This object ID is reserved to allow the IDs for this table's objects -- to align with the objects in the ipIfStatsTable. -- ::= { ipSystemStatsEntry 2 } ipSystemStatsInReceives OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of input IP datagrams received, including those received in error. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime." ::= { ipSystemStatsEntry 3 } ipSystemStatsHCInReceives OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of input IP datagrams received, including those received in error. This object counts the same datagrams as ipSystemStatsInReceives, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime." ::= { ipSystemStatsEntry 4 } ipSystemStatsInOctets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of octets received in input IP datagrams, including those received in error. Octets from datagrams counted in ipSystemStatsInReceives MUST be counted here. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime." ::= { ipSystemStatsEntry 5 } ipSystemStatsHCInOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of octets received in input IP datagrams, including those received in error. This object counts the same octets as ipSystemStatsInOctets, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime." ::= { ipSystemStatsEntry 6 } ipSystemStatsInHdrErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of input IP datagrams discarded due to errors in their IP headers, including version number mismatch, other format errors, hop count exceeded, errors discovered in processing their IP options, etc. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime." ::= { ipSystemStatsEntry 7 } ipSystemStatsInNoRoutes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of input IP datagrams discarded because no route could be found to transmit them to their destination. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime." ::= { ipSystemStatsEntry 8 } ipSystemStatsInAddrErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of input IP datagrams discarded because the IP address in their IP header's destination field was not a valid address to be received at this entity. This count includes invalid addresses (e.g., ::0). For entities that are not IP routers and therefore do not forward datagrams, this counter includes datagrams discarded because the destination address was not a local address. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime." ::= { ipSystemStatsEntry 9 } ipSystemStatsInUnknownProtos OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of locally-addressed IP datagrams received successfully but discarded because of an unknown or unsupported protocol. When tracking interface statistics, the counter of the interface to which these datagrams were addressed is incremented. This interface might not be the same as the input interface for some of the datagrams. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime." ::= { ipSystemStatsEntry 10 } ipSystemStatsInTruncatedPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of input IP datagrams discarded because the datagram frame didn't carry enough data. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime." ::= { ipSystemStatsEntry 11 } ipSystemStatsInForwDatagrams OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of input datagrams for which this entity was not their final IP destination and for which this entity attempted to find a route to forward them to that final destination. In entities that do not act as IP routers, this counter will include only those datagrams that were Source-Routed via this entity, and the Source-Route processing was successful. When tracking interface statistics, the counter of the incoming interface is incremented for each datagram. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime." ::= { ipSystemStatsEntry 12 } ipSystemStatsHCInForwDatagrams OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of input datagrams for which this entity was not their final IP destination and for which this entity attempted to find a route to forward them to that final destination. This object counts the same packets as ipSystemStatsInForwDatagrams, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime." ::= { ipSystemStatsEntry 13 } ipSystemStatsReasmReqds OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of IP fragments received that needed to be reassembled at this interface. When tracking interface statistics, the counter of the interface to which these fragments were addressed is incremented. This interface might not be the same as the input interface for some of the fragments. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime." ::= { ipSystemStatsEntry 14 } ipSystemStatsReasmOKs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of IP datagrams successfully reassembled. When tracking interface statistics, the counter of the interface to which these datagrams were addressed is incremented. This interface might not be the same as the input interface for some of the datagrams. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime." ::= { ipSystemStatsEntry 15 } ipSystemStatsReasmFails OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of failures detected by the IP re-assembly algorithm (for whatever reason: timed out, errors, etc.). Note that this is not necessarily a count of discarded IP fragments since some algorithms (notably the algorithm in RFC 815) can lose track of the number of fragments by combining them as they are received. When tracking interface statistics, the counter of the interface to which these fragments were addressed is incremented. This interface might not be the same as the input interface for some of the fragments. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime." ::= { ipSystemStatsEntry 16 } ipSystemStatsInDiscards OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of input IP datagrams for which no problems were encountered to prevent their continued processing, but were discarded (e.g., for lack of buffer space). Note that this counter does not include any datagrams discarded while awaiting re-assembly. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime." ::= { ipSystemStatsEntry 17 } ipSystemStatsInDelivers OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of datagrams successfully delivered to IP user-protocols (including ICMP). When tracking interface statistics, the counter of the interface to which these datagrams were addressed is incremented. This interface might not be the same as the input interface for some of the datagrams. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime." ::= { ipSystemStatsEntry 18 } ipSystemStatsHCInDelivers OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of datagrams successfully delivered to IP user-protocols (including ICMP). This object counts the same packets as ipSystemStatsInDelivers, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime." ::= { ipSystemStatsEntry 19 } ipSystemStatsOutRequests OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of IP datagrams that local IP user- protocols (including ICMP) supplied to IP in requests for transmission. Note that this counter does not include any datagrams counted in ipSystemStatsOutForwDatagrams. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime." ::= { ipSystemStatsEntry 20 } ipSystemStatsHCOutRequests OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of IP datagrams that local IP user- protocols (including ICMP) supplied to IP in requests for transmission. This object counts the same packets as ipSystemStatsOutRequests, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime." ::= { ipSystemStatsEntry 21 } ipSystemStatsOutNoRoutes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of locally generated IP datagrams discarded because no route could be found to transmit them to their destination. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime." ::= { ipSystemStatsEntry 22 } ipSystemStatsOutForwDatagrams OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of datagrams for which this entity was not their final IP destination and for which it was successful in finding a path to their final destination. In entities that do not act as IP routers, this counter will include only those datagrams that were Source-Routed via this entity, and the Source-Route processing was successful. When tracking interface statistics, the counter of the outgoing interface is incremented for a successfully forwarded datagram. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime." ::= { ipSystemStatsEntry 23 } ipSystemStatsHCOutForwDatagrams OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of datagrams for which this entity was not their final IP destination and for which it was successful in finding a path to their final destination. This object counts the same packets as ipSystemStatsOutForwDatagrams, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime." ::= { ipSystemStatsEntry 24 } ipSystemStatsOutDiscards OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of output IP datagrams for which no problem was encountered to prevent their transmission to their destination, but were discarded (e.g., for lack of buffer space). Note that this counter would include datagrams counted in ipSystemStatsOutForwDatagrams if any such datagrams met this (discretionary) discard criterion. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime." ::= { ipSystemStatsEntry 25 } ipSystemStatsOutFragReqds OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of IP datagrams that would require fragmentation in order to be transmitted. When tracking interface statistics, the counter of the outgoing interface is incremented for a successfully fragmented datagram. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime." ::= { ipSystemStatsEntry 26 } ipSystemStatsOutFragOKs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of IP datagrams that have been successfully fragmented. When tracking interface statistics, the counter of the outgoing interface is incremented for a successfully fragmented datagram. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime." ::= { ipSystemStatsEntry 27 } ipSystemStatsOutFragFails OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of IP datagrams that have been discarded because they needed to be fragmented but could not be. This includes IPv4 packets that have the DF bit set and IPv6 packets that are being forwarded and exceed the outgoing link MTU. When tracking interface statistics, the counter of the outgoing interface is incremented for an unsuccessfully fragmented datagram. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime." ::= { ipSystemStatsEntry 28 } ipSystemStatsOutFragCreates OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of output datagram fragments that have been generated as a result of IP fragmentation. When tracking interface statistics, the counter of the outgoing interface is incremented for a successfully fragmented datagram. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime." ::= { ipSystemStatsEntry 29 } ipSystemStatsOutTransmits OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of IP datagrams that this entity supplied to the lower layers for transmission. This includes datagrams generated locally and those forwarded by this entity. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime." ::= { ipSystemStatsEntry 30 } ipSystemStatsHCOutTransmits OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of IP datagrams that this entity supplied to the lower layers for transmission. This object counts the same datagrams as ipSystemStatsOutTransmits, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime." ::= { ipSystemStatsEntry 31 } ipSystemStatsOutOctets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of octets in IP datagrams delivered to the lower layers for transmission. Octets from datagrams counted in ipSystemStatsOutTransmits MUST be counted here. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime." ::= { ipSystemStatsEntry 32 } ipSystemStatsHCOutOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of octets in IP datagrams delivered to the lower layers for transmission. This objects counts the same octets as ipSystemStatsOutOctets, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime." ::= { ipSystemStatsEntry 33 } ipSystemStatsInMcastPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of IP multicast datagrams received. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime." ::= { ipSystemStatsEntry 34 } ipSystemStatsHCInMcastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of IP multicast datagrams received. This object counts the same datagrams as ipSystemStatsInMcastPkts but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime." ::= { ipSystemStatsEntry 35 } ipSystemStatsInMcastOctets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of octets received in IP multicast datagrams. Octets from datagrams counted in ipSystemStatsInMcastPkts MUST be counted here. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime." ::= { ipSystemStatsEntry 36 } ipSystemStatsHCInMcastOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of octets received in IP multicast datagrams. This object counts the same octets as ipSystemStatsInMcastOctets, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime." ::= { ipSystemStatsEntry 37 } ipSystemStatsOutMcastPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of IP multicast datagrams transmitted. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime." ::= { ipSystemStatsEntry 38 } ipSystemStatsHCOutMcastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of IP multicast datagrams transmitted. This object counts the same datagrams as ipSystemStatsOutMcastPkts, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime." ::= { ipSystemStatsEntry 39 } ipSystemStatsOutMcastOctets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of octets transmitted in IP multicast datagrams. Octets from datagrams counted in ipSystemStatsOutMcastPkts MUST be counted here. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime." ::= { ipSystemStatsEntry 40 } ipSystemStatsHCOutMcastOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of octets transmitted in IP multicast datagrams. This object counts the same octets as ipSystemStatsOutMcastOctets, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime." ::= { ipSystemStatsEntry 41 } ipSystemStatsInBcastPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of IP broadcast datagrams received. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime." ::= { ipSystemStatsEntry 42 } ipSystemStatsHCInBcastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of IP broadcast datagrams received. This object counts the same datagrams as ipSystemStatsInBcastPkts but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime." ::= { ipSystemStatsEntry 43 } ipSystemStatsOutBcastPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of IP broadcast datagrams transmitted. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime." ::= { ipSystemStatsEntry 44 } ipSystemStatsHCOutBcastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of IP broadcast datagrams transmitted. This object counts the same datagrams as ipSystemStatsOutBcastPkts, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime." ::= { ipSystemStatsEntry 45 } ipSystemStatsDiscontinuityTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime on the most recent occasion at which any one or more of this entry's counters suffered a discontinuity. If no such discontinuities have occurred since the last re- initialization of the local management subsystem, then this object contains a zero value." ::= { ipSystemStatsEntry 46 } ipSystemStatsRefreshRate OBJECT-TYPE SYNTAX Unsigned32 UNITS "milli-seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum reasonable polling interval for this entry. This object provides an indication of the minimum amount of time required to update the counters in this entry." ::= { ipSystemStatsEntry 47 } ipIfStatsTableLastChange OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime on the most recent occasion at which a row in the ipIfStatsTable was added or deleted. If new objects are added to the ipIfStatsTable that require the ipIfStatsTableLastChange to be updated when they are modified, they must specify that requirement in their description clause." ::= { ipTrafficStats 2 } ipIfStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF IpIfStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table containing per-interface traffic statistics. This table and the ipSystemStatsTable contain similar objects whose difference is in their granularity. Where this table contains per-interface statistics, the ipSystemStatsTable contains the same statistics, but counted on a system wide basis." ::= { ipTrafficStats 3 } ipIfStatsEntry OBJECT-TYPE SYNTAX IpIfStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An interface statistics entry containing objects for a particular interface and version of IP." INDEX { ipIfStatsIPVersion, ipIfStatsIfIndex } ::= { ipIfStatsTable 1 } IpIfStatsEntry ::= SEQUENCE { ipIfStatsIPVersion InetVersion, ipIfStatsIfIndex InterfaceIndex, ipIfStatsInReceives Counter32, ipIfStatsHCInReceives Counter64, ipIfStatsInOctets Counter32, ipIfStatsHCInOctets Counter64, ipIfStatsInHdrErrors Counter32, ipIfStatsInNoRoutes Counter32, ipIfStatsInAddrErrors Counter32, ipIfStatsInUnknownProtos Counter32, ipIfStatsInTruncatedPkts Counter32, ipIfStatsInForwDatagrams Counter32, ipIfStatsHCInForwDatagrams Counter64, ipIfStatsReasmReqds Counter32, ipIfStatsReasmOKs Counter32, ipIfStatsReasmFails Counter32, ipIfStatsInDiscards Counter32, ipIfStatsInDelivers Counter32, ipIfStatsHCInDelivers Counter64, ipIfStatsOutRequests Counter32, ipIfStatsHCOutRequests Counter64, ipIfStatsOutForwDatagrams Counter32, ipIfStatsHCOutForwDatagrams Counter64, ipIfStatsOutDiscards Counter32, ipIfStatsOutFragReqds Counter32, ipIfStatsOutFragOKs Counter32, ipIfStatsOutFragFails Counter32, ipIfStatsOutFragCreates Counter32, ipIfStatsOutTransmits Counter32, ipIfStatsHCOutTransmits Counter64, ipIfStatsOutOctets Counter32, ipIfStatsHCOutOctets Counter64, ipIfStatsInMcastPkts Counter32, ipIfStatsHCInMcastPkts Counter64, ipIfStatsInMcastOctets Counter32, ipIfStatsHCInMcastOctets Counter64, ipIfStatsOutMcastPkts Counter32, ipIfStatsHCOutMcastPkts Counter64, ipIfStatsOutMcastOctets Counter32, ipIfStatsHCOutMcastOctets Counter64, ipIfStatsInBcastPkts Counter32, ipIfStatsHCInBcastPkts Counter64, ipIfStatsOutBcastPkts Counter32, ipIfStatsHCOutBcastPkts Counter64, ipIfStatsDiscontinuityTime TimeStamp, ipIfStatsRefreshRate Unsigned32 } ipIfStatsIPVersion OBJECT-TYPE SYNTAX InetVersion MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP version of this row." ::= { ipIfStatsEntry 1 } ipIfStatsIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index value that uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of the IF-MIB's ifIndex." ::= { ipIfStatsEntry 2 } ipIfStatsInReceives OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of input IP datagrams received, including those received in error. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime." ::= { ipIfStatsEntry 3 } ipIfStatsHCInReceives OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of input IP datagrams received, including those received in error. This object counts the same datagrams as ipIfStatsInReceives, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime." ::= { ipIfStatsEntry 4 } ipIfStatsInOctets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of octets received in input IP datagrams, including those received in error. Octets from datagrams counted in ipIfStatsInReceives MUST be counted here. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime." ::= { ipIfStatsEntry 5 } ipIfStatsHCInOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of octets received in input IP datagrams, including those received in error. This object counts the same octets as ipIfStatsInOctets, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime." ::= { ipIfStatsEntry 6 } ipIfStatsInHdrErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of input IP datagrams discarded due to errors in their IP headers, including version number mismatch, other format errors, hop count exceeded, errors discovered in processing their IP options, etc. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime." ::= { ipIfStatsEntry 7 } ipIfStatsInNoRoutes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of input IP datagrams discarded because no route could be found to transmit them to their destination. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime." ::= { ipIfStatsEntry 8 } ipIfStatsInAddrErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of input IP datagrams discarded because the IP address in their IP header's destination field was not a valid address to be received at this entity. This count includes invalid addresses (e.g., ::0). For entities that are not IP routers and therefore do not forward datagrams, this counter includes datagrams discarded because the destination address was not a local address. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime." ::= { ipIfStatsEntry 9 } ipIfStatsInUnknownProtos OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of locally-addressed IP datagrams received successfully but discarded because of an unknown or unsupported protocol. When tracking interface statistics, the counter of the interface to which these datagrams were addressed is incremented. This interface might not be the same as the input interface for some of the datagrams. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime." ::= { ipIfStatsEntry 10 } ipIfStatsInTruncatedPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of input IP datagrams discarded because the datagram frame didn't carry enough data. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime." ::= { ipIfStatsEntry 11 } ipIfStatsInForwDatagrams OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of input datagrams for which this entity was not their final IP destination and for which this entity attempted to find a route to forward them to that final destination. In entities that do not act as IP routers, this counter will include only those datagrams that were Source-Routed via this entity, and the Source-Route processing was successful. When tracking interface statistics, the counter of the incoming interface is incremented for each datagram. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime." ::= { ipIfStatsEntry 12 } ipIfStatsHCInForwDatagrams OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of input datagrams for which this entity was not their final IP destination and for which this entity attempted to find a route to forward them to that final destination. This object counts the same packets as ipIfStatsInForwDatagrams, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime." ::= { ipIfStatsEntry 13 } ipIfStatsReasmReqds OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of IP fragments received that needed to be reassembled at this interface. When tracking interface statistics, the counter of the interface to which these fragments were addressed is incremented. This interface might not be the same as the input interface for some of the fragments. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime." ::= { ipIfStatsEntry 14 } ipIfStatsReasmOKs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of IP datagrams successfully reassembled. When tracking interface statistics, the counter of the interface to which these datagrams were addressed is incremented. This interface might not be the same as the input interface for some of the datagrams. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime." ::= { ipIfStatsEntry 15 } ipIfStatsReasmFails OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of failures detected by the IP re-assembly algorithm (for whatever reason: timed out, errors, etc.). Note that this is not necessarily a count of discarded IP fragments since some algorithms (notably the algorithm in RFC 815) can lose track of the number of fragments by combining them as they are received. When tracking interface statistics, the counter of the interface to which these fragments were addressed is incremented. This interface might not be the same as the input interface for some of the fragments. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime." ::= { ipIfStatsEntry 16 } ipIfStatsInDiscards OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of input IP datagrams for which no problems were encountered to prevent their continued processing, but were discarded (e.g., for lack of buffer space). Note that this counter does not include any datagrams discarded while awaiting re-assembly. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime." ::= { ipIfStatsEntry 17 } ipIfStatsInDelivers OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of datagrams successfully delivered to IP user-protocols (including ICMP). When tracking interface statistics, the counter of the interface to which these datagrams were addressed is incremented. This interface might not be the same as the input interface for some of the datagrams. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime." ::= { ipIfStatsEntry 18 } ipIfStatsHCInDelivers OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of datagrams successfully delivered to IP user-protocols (including ICMP). This object counts the same packets as ipIfStatsInDelivers, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime." ::= { ipIfStatsEntry 19 } ipIfStatsOutRequests OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of IP datagrams that local IP user- protocols (including ICMP) supplied to IP in requests for transmission. Note that this counter does not include any datagrams counted in ipIfStatsOutForwDatagrams. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime." ::= { ipIfStatsEntry 20 } ipIfStatsHCOutRequests OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of IP datagrams that local IP user- protocols (including ICMP) supplied to IP in requests for transmission. This object counts the same packets as ipIfStatsOutRequests, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime." ::= { ipIfStatsEntry 21 } -- This object ID is reserved to allow the IDs for this table's objects -- to align with the objects in the ipSystemStatsTable. -- ::= {ipIfStatsEntry 22} ipIfStatsOutForwDatagrams OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of datagrams for which this entity was not their final IP destination and for which it was successful in finding a path to their final destination. In entities that do not act as IP routers, this counter will include only those datagrams that were Source-Routed via this entity, and the Source-Route processing was successful. When tracking interface statistics, the counter of the outgoing interface is incremented for a successfully forwarded datagram. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime." ::= { ipIfStatsEntry 23 } ipIfStatsHCOutForwDatagrams OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of datagrams for which this entity was not their final IP destination and for which it was successful in finding a path to their final destination. This object counts the same packets as ipIfStatsOutForwDatagrams, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime." ::= { ipIfStatsEntry 24 } ipIfStatsOutDiscards OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of output IP datagrams for which no problem was encountered to prevent their transmission to their destination, but were discarded (e.g., for lack of buffer space). Note that this counter would include datagrams counted in ipIfStatsOutForwDatagrams if any such datagrams met this (discretionary) discard criterion. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime." ::= { ipIfStatsEntry 25 } ipIfStatsOutFragReqds OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of IP datagrams that would require fragmentation in order to be transmitted. When tracking interface statistics, the counter of the outgoing interface is incremented for a successfully fragmented datagram. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime." ::= { ipIfStatsEntry 26 } ipIfStatsOutFragOKs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of IP datagrams that have been successfully fragmented. When tracking interface statistics, the counter of the outgoing interface is incremented for a successfully fragmented datagram. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime." ::= { ipIfStatsEntry 27 } ipIfStatsOutFragFails OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of IP datagrams that have been discarded because they needed to be fragmented but could not be. This includes IPv4 packets that have the DF bit set and IPv6 packets that are being forwarded and exceed the outgoing link MTU. When tracking interface statistics, the counter of the outgoing interface is incremented for an unsuccessfully fragmented datagram. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime." ::= { ipIfStatsEntry 28 } ipIfStatsOutFragCreates OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of output datagram fragments that have been generated as a result of IP fragmentation. When tracking interface statistics, the counter of the outgoing interface is incremented for a successfully fragmented datagram. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime." ::= { ipIfStatsEntry 29 } ipIfStatsOutTransmits OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of IP datagrams that this entity supplied to the lower layers for transmission. This includes datagrams generated locally and those forwarded by this entity. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime." ::= { ipIfStatsEntry 30 } ipIfStatsHCOutTransmits OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of IP datagrams that this entity supplied to the lower layers for transmission. This object counts the same datagrams as ipIfStatsOutTransmits, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime." ::= { ipIfStatsEntry 31 } ipIfStatsOutOctets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of octets in IP datagrams delivered to the lower layers for transmission. Octets from datagrams counted in ipIfStatsOutTransmits MUST be counted here. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime." ::= { ipIfStatsEntry 32 } ipIfStatsHCOutOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of octets in IP datagrams delivered to the lower layers for transmission. This objects counts the same octets as ipIfStatsOutOctets, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime." ::= { ipIfStatsEntry 33 } ipIfStatsInMcastPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of IP multicast datagrams received. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime." ::= { ipIfStatsEntry 34 } ipIfStatsHCInMcastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of IP multicast datagrams received. This object counts the same datagrams as ipIfStatsInMcastPkts, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime." ::= { ipIfStatsEntry 35 } ipIfStatsInMcastOctets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of octets received in IP multicast datagrams. Octets from datagrams counted in ipIfStatsInMcastPkts MUST be counted here. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime." ::= { ipIfStatsEntry 36 } ipIfStatsHCInMcastOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of octets received in IP multicast datagrams. This object counts the same octets as ipIfStatsInMcastOctets, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime." ::= { ipIfStatsEntry 37 } ipIfStatsOutMcastPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of IP multicast datagrams transmitted. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime." ::= { ipIfStatsEntry 38 } ipIfStatsHCOutMcastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of IP multicast datagrams transmitted. This object counts the same datagrams as ipIfStatsOutMcastPkts, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime." ::= { ipIfStatsEntry 39 } ipIfStatsOutMcastOctets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of octets transmitted in IP multicast datagrams. Octets from datagrams counted in ipIfStatsOutMcastPkts MUST be counted here. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime." ::= { ipIfStatsEntry 40 } ipIfStatsHCOutMcastOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of octets transmitted in IP multicast datagrams. This object counts the same octets as ipIfStatsOutMcastOctets, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime." ::= { ipIfStatsEntry 41 } ipIfStatsInBcastPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of IP broadcast datagrams received. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime." ::= { ipIfStatsEntry 42 } ipIfStatsHCInBcastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of IP broadcast datagrams received. This object counts the same datagrams as ipIfStatsInBcastPkts, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime." ::= { ipIfStatsEntry 43 } ipIfStatsOutBcastPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of IP broadcast datagrams transmitted. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime." ::= { ipIfStatsEntry 44 } ipIfStatsHCOutBcastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of IP broadcast datagrams transmitted. This object counts the same datagrams as ipIfStatsOutBcastPkts, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime." ::= { ipIfStatsEntry 45 } ipIfStatsDiscontinuityTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime on the most recent occasion at which any one or more of this entry's counters suffered a discontinuity. If no such discontinuities have occurred since the last re- initialization of the local management subsystem, then this object contains a zero value." ::= { ipIfStatsEntry 46 } ipIfStatsRefreshRate OBJECT-TYPE SYNTAX Unsigned32 UNITS "milli-seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum reasonable polling interval for this entry. This object provides an indication of the minimum amount of time required to update the counters in this entry." ::= { ipIfStatsEntry 47 } -- -- Internet Address Prefix table -- ipAddressPrefixTable OBJECT-TYPE SYNTAX SEQUENCE OF IpAddressPrefixEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table allows the user to determine the source of an IP address or set of IP addresses, and allows other tables to share the information via pointer rather than by copying. For example, when the node configures both a unicast and anycast address for a prefix, the ipAddressPrefix objects for those addresses will point to a single row in this table. This table primarily provides support for IPv6 prefixes, and several of the objects are less meaningful for IPv4. The table continues to allow IPv4 addresses to allow future flexibility. In order to promote a common configuration, this document includes suggestions for default values for IPv4 prefixes. Each of these values may be overridden if an object is meaningful to the node. All prefixes used by this entity should be included in this table independent of how the entity learned the prefix. (This table isn't limited to prefixes learned from router advertisements.)" ::= { ip 32 } ipAddressPrefixEntry OBJECT-TYPE SYNTAX IpAddressPrefixEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the ipAddressPrefixTable." INDEX { ipAddressPrefixIfIndex, ipAddressPrefixType, ipAddressPrefixPrefix, ipAddressPrefixLength } ::= { ipAddressPrefixTable 1 } IpAddressPrefixEntry ::= SEQUENCE { ipAddressPrefixIfIndex InterfaceIndex, ipAddressPrefixType InetAddressType, ipAddressPrefixPrefix InetAddress, ipAddressPrefixLength InetAddressPrefixLength, ipAddressPrefixOrigin IpAddressPrefixOriginTC, ipAddressPrefixOnLinkFlag TruthValue, ipAddressPrefixAutonomousFlag TruthValue, ipAddressPrefixAdvPreferredLifetime Unsigned32, ipAddressPrefixAdvValidLifetime Unsigned32 } ipAddressPrefixIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index value that uniquely identifies the interface on which this prefix is configured. The interface identified by a particular value of this index is the same interface as identified by the same value of the IF-MIB's ifIndex." ::= { ipAddressPrefixEntry 1 } ipAddressPrefixType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The address type of ipAddressPrefix." ::= { ipAddressPrefixEntry 2 } ipAddressPrefixPrefix OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The address prefix. The address type of this object is specified in ipAddressPrefixType. The length of this object is the standard length for objects of that type (4 or 16 bytes). Any bits after ipAddressPrefixLength must be zero. Implementors need to be aware that, if the size of ipAddressPrefixPrefix exceeds 114 octets, then OIDS of instances of columns in this row will have more than 128 sub-identifiers and cannot be accessed using SNMPv1, SNMPv2c, or SNMPv3." ::= { ipAddressPrefixEntry 3 } ipAddressPrefixLength OBJECT-TYPE SYNTAX InetAddressPrefixLength MAX-ACCESS not-accessible STATUS current DESCRIPTION "The prefix length associated with this prefix. The value 0 has no special meaning for this object. It simply refers to address '::/0'." ::= { ipAddressPrefixEntry 4 } ipAddressPrefixOrigin OBJECT-TYPE SYNTAX IpAddressPrefixOriginTC MAX-ACCESS read-only STATUS current DESCRIPTION "The origin of this prefix." ::= { ipAddressPrefixEntry 5 } ipAddressPrefixOnLinkFlag OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object has the value 'true(1)', if this prefix can be used for on-link determination; otherwise, the value is 'false(2)'. The default for IPv4 prefixes is 'true(1)'." REFERENCE "For IPv6 RFC 2461, especially sections 2 and 4.6.2 and RFC 2462" ::= { ipAddressPrefixEntry 6 } ipAddressPrefixAutonomousFlag OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Autonomous address configuration flag. When true(1), indicates that this prefix can be used for autonomous address configuration (i.e., can be used to form a local interface address). If false(2), it is not used to auto- configure a local interface address. The default for IPv4 prefixes is 'false(2)'." REFERENCE "For IPv6 RFC 2461, especially sections 2 and 4.6.2 and RFC 2462" ::= { ipAddressPrefixEntry 7 } ipAddressPrefixAdvPreferredLifetime OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The remaining length of time, in seconds, that this prefix will continue to be preferred, i.e., time until deprecation. A value of 4,294,967,295 represents infinity. The address generated from a deprecated prefix should no longer be used as a source address in new communications, but packets received on such an interface are processed as expected. The default for IPv4 prefixes is 4,294,967,295 (infinity)." REFERENCE "For IPv6 RFC 2461, especially sections 2 and 4.6.2 and RFC 2462" ::= { ipAddressPrefixEntry 8 } ipAddressPrefixAdvValidLifetime OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The remaining length of time, in seconds, that this prefix will continue to be valid, i.e., time until invalidation. A value of 4,294,967,295 represents infinity. The address generated from an invalidated prefix should not appear as the destination or source address of a packet. The default for IPv4 prefixes is 4,294,967,295 (infinity)." REFERENCE "For IPv6 RFC 2461, especially sections 2 and 4.6.2 and RFC 2462" ::= { ipAddressPrefixEntry 9 } -- -- Internet Address Table -- ipAddressSpinLock OBJECT-TYPE SYNTAX TestAndIncr MAX-ACCESS read-write STATUS current DESCRIPTION "An advisory lock used to allow cooperating SNMP managers to coordinate their use of the set operation in creating or modifying rows within this table. In order to use this lock to coordinate the use of set operations, managers should first retrieve ipAddressTableSpinLock. They should then determine the appropriate row to create or modify. Finally, they should issue the appropriate set command, including the retrieved value of ipAddressSpinLock. If another manager has altered the table in the meantime, then the value of ipAddressSpinLock will have changed, and the creation will fail as it will be specifying an incorrect value for ipAddressSpinLock. It is suggested, but not required, that the ipAddressSpinLock be the first var bind for each set of objects representing a 'row' in a PDU." ::= { ip 33 } ipAddressTable OBJECT-TYPE SYNTAX SEQUENCE OF IpAddressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains addressing information relevant to the entity's interfaces. This table does not contain multicast address information. Tables for such information should be contained in multicast specific MIBs, such as RFC 3019. While this table is writable, the user will note that several objects, such as ipAddressOrigin, are not. The intention in allowing a user to write to this table is to allow them to add or remove any entry that isn't permanent. The user should be allowed to modify objects and entries when that would not cause inconsistencies within the table. Allowing write access to objects, such as ipAddressOrigin, could allow a user to insert an entry and then label it incorrectly. Note well: When including IPv6 link-local addresses in this table, the entry must use an InetAddressType of 'ipv6z' in order to differentiate between the possible interfaces." ::= { ip 34 } ipAddressEntry OBJECT-TYPE SYNTAX IpAddressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An address mapping for a particular interface." INDEX { ipAddressAddrType, ipAddressAddr } ::= { ipAddressTable 1 } IpAddressEntry ::= SEQUENCE { ipAddressAddrType InetAddressType, ipAddressAddr InetAddress, ipAddressIfIndex InterfaceIndex, ipAddressType INTEGER, ipAddressPrefix RowPointer, ipAddressOrigin IpAddressOriginTC, ipAddressStatus IpAddressStatusTC, ipAddressCreated TimeStamp, ipAddressLastChanged TimeStamp, ipAddressRowStatus RowStatus, ipAddressStorageType StorageType } ipAddressAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The address type of ipAddressAddr." ::= { ipAddressEntry 1 } ipAddressAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP address to which this entry's addressing information pertains. The address type of this object is specified in ipAddressAddrType. Implementors need to be aware that if the size of ipAddressAddr exceeds 116 octets, then OIDS of instances of columns in this row will have more than 128 sub-identifiers and cannot be accessed using SNMPv1, SNMPv2c, or SNMPv3." ::= { ipAddressEntry 2 } ipAddressIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-create STATUS current DESCRIPTION "The index value that uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of the IF-MIB's ifIndex." ::= { ipAddressEntry 3 } ipAddressType OBJECT-TYPE SYNTAX INTEGER { unicast(1), anycast(2), broadcast(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "The type of address. broadcast(3) is not a valid value for IPv6 addresses (RFC 3513)." DEFVAL { unicast } ::= { ipAddressEntry 4 } ipAddressPrefix OBJECT-TYPE SYNTAX RowPointer MAX-ACCESS read-only STATUS current DESCRIPTION "A pointer to the row in the prefix table to which this address belongs. May be { 0 0 } if there is no such row." DEFVAL { zeroDotZero } ::= { ipAddressEntry 5 } ipAddressOrigin OBJECT-TYPE SYNTAX IpAddressOriginTC MAX-ACCESS read-only STATUS current DESCRIPTION "The origin of the address." ::= { ipAddressEntry 6 } ipAddressStatus OBJECT-TYPE SYNTAX IpAddressStatusTC MAX-ACCESS read-create STATUS current DESCRIPTION "The status of the address, describing if the address can be used for communication. In the absence of other information, an IPv4 address is always preferred(1)." DEFVAL { preferred } ::= { ipAddressEntry 7 } ipAddressCreated OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime at the time this entry was created. If this entry was created prior to the last re- initialization of the local network management subsystem, then this object contains a zero value." ::= { ipAddressEntry 8 } ipAddressLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime at the time this entry was last updated. If this entry was updated prior to the last re- initialization of the local network management subsystem, then this object contains a zero value." ::= { ipAddressEntry 9 } ipAddressRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row. The RowStatus TC requires that this DESCRIPTION clause states under which circumstances other objects in this row can be modified. The value of this object has no effect on whether other objects in this conceptual row can be modified. A conceptual row can not be made active until the ipAddressIfIndex has been set to a valid index." ::= { ipAddressEntry 10 } ipAddressStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The storage type for this conceptual row. If this object has a value of 'permanent', then no other objects are required to be able to be modified." DEFVAL { volatile } ::= { ipAddressEntry 11 } -- -- the Internet Address Translation table -- ipNetToPhysicalTable OBJECT-TYPE SYNTAX SEQUENCE OF IpNetToPhysicalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP Address Translation table used for mapping from IP addresses to physical addresses. The Address Translation tables contain the IP address to 'physical' address equivalences. Some interfaces do not use translation tables for determining address equivalences (e.g., DDN-X.25 has an algorithmic method); if all interfaces are of this type, then the Address Translation table is empty, i.e., has zero entries. While many protocols may be used to populate this table, ARP and Neighbor Discovery are the most likely options." REFERENCE "RFC 826 and RFC 2461" ::= { ip 35 } ipNetToPhysicalEntry OBJECT-TYPE SYNTAX IpNetToPhysicalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains one IP address to `physical' address equivalence." INDEX { ipNetToPhysicalIfIndex, ipNetToPhysicalNetAddressType, ipNetToPhysicalNetAddress } ::= { ipNetToPhysicalTable 1 } IpNetToPhysicalEntry ::= SEQUENCE { ipNetToPhysicalIfIndex InterfaceIndex, ipNetToPhysicalNetAddressType InetAddressType, ipNetToPhysicalNetAddress InetAddress, ipNetToPhysicalPhysAddress PhysAddress, ipNetToPhysicalLastUpdated TimeStamp, ipNetToPhysicalType INTEGER, ipNetToPhysicalState INTEGER, ipNetToPhysicalRowStatus RowStatus } ipNetToPhysicalIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index value that uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of the IF-MIB's ifIndex." ::= { ipNetToPhysicalEntry 1 } ipNetToPhysicalNetAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The type of ipNetToPhysicalNetAddress." ::= { ipNetToPhysicalEntry 2 } ipNetToPhysicalNetAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP Address corresponding to the media-dependent `physical' address. The address type of this object is specified in ipNetToPhysicalAddressType. Implementors need to be aware that if the size of ipNetToPhysicalNetAddress exceeds 115 octets, then OIDS of instances of columns in this row will have more than 128 sub-identifiers and cannot be accessed using SNMPv1, SNMPv2c, or SNMPv3." ::= { ipNetToPhysicalEntry 3 } ipNetToPhysicalPhysAddress OBJECT-TYPE SYNTAX PhysAddress (SIZE(0..65535)) MAX-ACCESS read-create STATUS current DESCRIPTION "The media-dependent `physical' address. As the entries in this table are typically not persistent when this object is written the entity SHOULD NOT save the change to non-volatile storage." ::= { ipNetToPhysicalEntry 4 } ipNetToPhysicalLastUpdated OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime at the time this entry was last updated. If this entry was updated prior to the last re- initialization of the local network management subsystem, then this object contains a zero value." ::= { ipNetToPhysicalEntry 5 } ipNetToPhysicalType OBJECT-TYPE SYNTAX INTEGER { other(1), -- none of the following invalid(2), -- an invalidated mapping dynamic(3), static(4), local(5) -- local interface } MAX-ACCESS read-create STATUS current DESCRIPTION "The type of mapping. Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the ipNetToPhysicalTable. That is, it effectively dis- associates the interface identified with said entry from the mapping identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive tabular information from agents that corresponds to entries not currently in use. Proper interpretation of such entries requires examination of the relevant ipNetToPhysicalType object. The 'dynamic(3)' type indicates that the IP address to physical addresses mapping has been dynamically resolved using e.g., IPv4 ARP or the IPv6 Neighbor Discovery protocol. The 'static(4)' type indicates that the mapping has been statically configured. Both of these refer to entries that provide mappings for other entities addresses. The 'local(5)' type indicates that the mapping is provided for an entity's own interface address. As the entries in this table are typically not persistent when this object is written the entity SHOULD NOT save the change to non-volatile storage." DEFVAL { static } ::= { ipNetToPhysicalEntry 6 } ipNetToPhysicalState OBJECT-TYPE SYNTAX INTEGER { reachable(1), -- confirmed reachability stale(2), -- unconfirmed reachability delay(3), -- waiting for reachability -- confirmation before entering -- the probe state probe(4), -- actively probing invalid(5), -- an invalidated mapping unknown(6), -- state can not be determined -- for some reason. incomplete(7) -- address resolution is being -- performed. } MAX-ACCESS read-only STATUS current DESCRIPTION "The Neighbor Unreachability Detection state for the interface when the address mapping in this entry is used. If Neighbor Unreachability Detection is not in use (e.g. for IPv4), this object is always unknown(6)." REFERENCE "RFC 2461" ::= { ipNetToPhysicalEntry 7 } ipNetToPhysicalRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row. The RowStatus TC requires that this DESCRIPTION clause states under which circumstances other objects in this row can be modified. The value of this object has no effect on whether other objects in this conceptual row can be modified. A conceptual row can not be made active until the ipNetToPhysicalPhysAddress object has been set. Note that if the ipNetToPhysicalType is set to 'invalid', the managed node may delete the entry independent of the state of this object." ::= { ipNetToPhysicalEntry 8 } -- -- The IPv6 Scope Zone Index Table. -- ipv6ScopeZoneIndexTable OBJECT-TYPE SYNTAX SEQUENCE OF Ipv6ScopeZoneIndexEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table used to describe IPv6 unicast and multicast scope zones. For those objects that have names rather than numbers, the names were chosen to coincide with the names used in the IPv6 address architecture document. " REFERENCE "Section 2.7 of RFC 4291" ::= { ip 36 } ipv6ScopeZoneIndexEntry OBJECT-TYPE SYNTAX Ipv6ScopeZoneIndexEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains the list of scope identifiers on a given interface." INDEX { ipv6ScopeZoneIndexIfIndex } ::= { ipv6ScopeZoneIndexTable 1 } Ipv6ScopeZoneIndexEntry ::= SEQUENCE { ipv6ScopeZoneIndexIfIndex InterfaceIndex, ipv6ScopeZoneIndexLinkLocal InetZoneIndex, ipv6ScopeZoneIndex3 InetZoneIndex, ipv6ScopeZoneIndexAdminLocal InetZoneIndex, ipv6ScopeZoneIndexSiteLocal InetZoneIndex, ipv6ScopeZoneIndex6 InetZoneIndex, ipv6ScopeZoneIndex7 InetZoneIndex, ipv6ScopeZoneIndexOrganizationLocal InetZoneIndex, ipv6ScopeZoneIndex9 InetZoneIndex, ipv6ScopeZoneIndexA InetZoneIndex, ipv6ScopeZoneIndexB InetZoneIndex, ipv6ScopeZoneIndexC InetZoneIndex, ipv6ScopeZoneIndexD InetZoneIndex } ipv6ScopeZoneIndexIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index value that uniquely identifies the interface to which these scopes belong. The interface identified by a particular value of this index is the same interface as identified by the same value of the IF-MIB's ifIndex." ::= { ipv6ScopeZoneIndexEntry 1 } ipv6ScopeZoneIndexLinkLocal OBJECT-TYPE SYNTAX InetZoneIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The zone index for the link-local scope on this interface." ::= { ipv6ScopeZoneIndexEntry 2 } ipv6ScopeZoneIndex3 OBJECT-TYPE SYNTAX InetZoneIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The zone index for scope 3 on this interface." ::= { ipv6ScopeZoneIndexEntry 3 } ipv6ScopeZoneIndexAdminLocal OBJECT-TYPE SYNTAX InetZoneIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The zone index for the admin-local scope on this interface." ::= { ipv6ScopeZoneIndexEntry 4 } ipv6ScopeZoneIndexSiteLocal OBJECT-TYPE SYNTAX InetZoneIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The zone index for the site-local scope on this interface." ::= { ipv6ScopeZoneIndexEntry 5 } ipv6ScopeZoneIndex6 OBJECT-TYPE SYNTAX InetZoneIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The zone index for scope 6 on this interface." ::= { ipv6ScopeZoneIndexEntry 6 } ipv6ScopeZoneIndex7 OBJECT-TYPE SYNTAX InetZoneIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The zone index for scope 7 on this interface." ::= { ipv6ScopeZoneIndexEntry 7 } ipv6ScopeZoneIndexOrganizationLocal OBJECT-TYPE SYNTAX InetZoneIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The zone index for the organization-local scope on this interface." ::= { ipv6ScopeZoneIndexEntry 8 } ipv6ScopeZoneIndex9 OBJECT-TYPE SYNTAX InetZoneIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The zone index for scope 9 on this interface." ::= { ipv6ScopeZoneIndexEntry 9 } ipv6ScopeZoneIndexA OBJECT-TYPE SYNTAX InetZoneIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The zone index for scope A on this interface." ::= { ipv6ScopeZoneIndexEntry 10 } ipv6ScopeZoneIndexB OBJECT-TYPE SYNTAX InetZoneIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The zone index for scope B on this interface." ::= { ipv6ScopeZoneIndexEntry 11 } ipv6ScopeZoneIndexC OBJECT-TYPE SYNTAX InetZoneIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The zone index for scope C on this interface." ::= { ipv6ScopeZoneIndexEntry 12 } ipv6ScopeZoneIndexD OBJECT-TYPE SYNTAX InetZoneIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The zone index for scope D on this interface." ::= { ipv6ScopeZoneIndexEntry 13 } -- -- The Default Router Table -- This table simply lists the default routers; for more information -- about routing tables, see the routing MIBs -- ipDefaultRouterTable OBJECT-TYPE SYNTAX SEQUENCE OF IpDefaultRouterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table used to describe the default routers known to this entity." ::= { ip 37 } ipDefaultRouterEntry OBJECT-TYPE SYNTAX IpDefaultRouterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains information about a default router known to this entity." INDEX {ipDefaultRouterAddressType, ipDefaultRouterAddress, ipDefaultRouterIfIndex} ::= { ipDefaultRouterTable 1 } IpDefaultRouterEntry ::= SEQUENCE { ipDefaultRouterAddressType InetAddressType, ipDefaultRouterAddress InetAddress, ipDefaultRouterIfIndex InterfaceIndex, ipDefaultRouterLifetime Unsigned32, ipDefaultRouterPreference INTEGER } ipDefaultRouterAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The address type for this row." ::= { ipDefaultRouterEntry 1 } ipDefaultRouterAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP address of the default router represented by this row. The address type of this object is specified in ipDefaultRouterAddressType. Implementers need to be aware that if the size of ipDefaultRouterAddress exceeds 115 octets, then OIDS of instances of columns in this row will have more than 128 sub-identifiers and cannot be accessed using SNMPv1, SNMPv2c, or SNMPv3." ::= { ipDefaultRouterEntry 2 } ipDefaultRouterIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index value that uniquely identifies the interface by which the router can be reached. The interface identified by a particular value of this index is the same interface as identified by the same value of the IF-MIB's ifIndex." ::= { ipDefaultRouterEntry 3 } ipDefaultRouterLifetime OBJECT-TYPE SYNTAX Unsigned32 (0..65535) UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The remaining length of time, in seconds, that this router will continue to be useful as a default router. A value of zero indicates that it is no longer useful as a default router. It is left to the implementer of the MIB as to whether a router with a lifetime of zero is removed from the list. For IPv6, this value should be extracted from the router advertisement messages." REFERENCE "For IPv6 RFC 2462 sections 4.2 and 6.3.4" ::= { ipDefaultRouterEntry 4 } ipDefaultRouterPreference OBJECT-TYPE SYNTAX INTEGER { reserved (-2), low (-1), medium (0), high (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "An indication of preference given to this router as a default router as described in he Default Router Preferences document. Treating the value as a 2 bit signed integer allows for simple arithmetic comparisons. For IPv4 routers or IPv6 routers that are not using the updated router advertisement format, this object is set to medium (0)." REFERENCE "RFC 4291, section 2.1" ::= { ipDefaultRouterEntry 5 } -- -- Configuration information for constructing router advertisements -- ipv6RouterAdvertSpinLock OBJECT-TYPE SYNTAX TestAndIncr MAX-ACCESS read-write STATUS current DESCRIPTION "An advisory lock used to allow cooperating SNMP managers to coordinate their use of the set operation in creating or modifying rows within this table. In order to use this lock to coordinate the use of set operations, managers should first retrieve ipv6RouterAdvertSpinLock. They should then determine the appropriate row to create or modify. Finally, they should issue the appropriate set command including the retrieved value of ipv6RouterAdvertSpinLock. If another manager has altered the table in the meantime, then the value of ipv6RouterAdvertSpinLock will have changed and the creation will fail as it will be specifying an incorrect value for ipv6RouterAdvertSpinLock. It is suggested, but not required, that the ipv6RouterAdvertSpinLock be the first var bind for each set of objects representing a 'row' in a PDU." ::= { ip 38 } ipv6RouterAdvertTable OBJECT-TYPE SYNTAX SEQUENCE OF Ipv6RouterAdvertEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table containing information used to construct router advertisements." ::= { ip 39 } ipv6RouterAdvertEntry OBJECT-TYPE SYNTAX Ipv6RouterAdvertEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing information used to construct router advertisements. Information in this table is persistent, and when this object is written, the entity SHOULD save the change to non-volatile storage." INDEX { ipv6RouterAdvertIfIndex } ::= { ipv6RouterAdvertTable 1 } Ipv6RouterAdvertEntry ::= SEQUENCE { ipv6RouterAdvertIfIndex InterfaceIndex, ipv6RouterAdvertSendAdverts TruthValue, ipv6RouterAdvertMaxInterval Unsigned32, ipv6RouterAdvertMinInterval Unsigned32, ipv6RouterAdvertManagedFlag TruthValue, ipv6RouterAdvertOtherConfigFlag TruthValue, ipv6RouterAdvertLinkMTU Unsigned32, ipv6RouterAdvertReachableTime Unsigned32, ipv6RouterAdvertRetransmitTime Unsigned32, ipv6RouterAdvertCurHopLimit Unsigned32, ipv6RouterAdvertDefaultLifetime Unsigned32, ipv6RouterAdvertRowStatus RowStatus } ipv6RouterAdvertIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index value that uniquely identifies the interface on which router advertisements constructed with this information will be transmitted. The interface identified by a particular value of this index is the same interface as identified by the same value of the IF-MIB's ifIndex." ::= { ipv6RouterAdvertEntry 1 } ipv6RouterAdvertSendAdverts OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "A flag indicating whether the router sends periodic router advertisements and responds to router solicitations on this interface." REFERENCE "RFC 2461 Section 6.2.1" DEFVAL { false } ::= { ipv6RouterAdvertEntry 2 } ipv6RouterAdvertMaxInterval OBJECT-TYPE SYNTAX Unsigned32 (4..1800) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum time allowed between sending unsolicited router advertisements from this interface." REFERENCE "RFC 2461 Section 6.2.1" DEFVAL { 600 } ::= { ipv6RouterAdvertEntry 3 } ipv6RouterAdvertMinInterval OBJECT-TYPE SYNTAX Unsigned32 (3..1350) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The minimum time allowed between sending unsolicited router advertisements from this interface. The default is 0.33 * ipv6RouterAdvertMaxInterval, however, in the case of a low value for ipv6RouterAdvertMaxInterval, the minimum value for this object is restricted to 3." REFERENCE "RFC 2461 Section 6.2.1" ::= { ipv6RouterAdvertEntry 4 } ipv6RouterAdvertManagedFlag OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The true/false value to be placed into the 'managed address configuration' flag field in router advertisements sent from this interface." REFERENCE "RFC 2461 Section 6.2.1" DEFVAL { false } ::= { ipv6RouterAdvertEntry 5 } ipv6RouterAdvertOtherConfigFlag OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The true/false value to be placed into the 'other stateful configuration' flag field in router advertisements sent from this interface." REFERENCE "RFC 2461 Section 6.2.1" DEFVAL { false } ::= { ipv6RouterAdvertEntry 6 } ipv6RouterAdvertLinkMTU OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "The value to be placed in MTU options sent by the router on this interface. A value of zero indicates that no MTU options are sent." REFERENCE "RFC 2461 Section 6.2.1" DEFVAL { 0 } ::= { ipv6RouterAdvertEntry 7 } ipv6RouterAdvertReachableTime OBJECT-TYPE SYNTAX Unsigned32 (0..3600000) UNITS "milliseconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value to be placed in the reachable time field in router advertisement messages sent from this interface. A value of zero in the router advertisement indicates that the advertisement isn't specifying a value for reachable time." REFERENCE "RFC 2461 Section 6.2.1" DEFVAL { 0 } ::= { ipv6RouterAdvertEntry 8 } ipv6RouterAdvertRetransmitTime OBJECT-TYPE SYNTAX Unsigned32 UNITS "milliseconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value to be placed in the retransmit timer field in router advertisements sent from this interface. A value of zero in the router advertisement indicates that the advertisement isn't specifying a value for retrans time." REFERENCE "RFC 2461 Section 6.2.1" DEFVAL { 0 } ::= { ipv6RouterAdvertEntry 9 } ipv6RouterAdvertCurHopLimit OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "The default value to be placed in the current hop limit field in router advertisements sent from this interface. The value should be set to the current diameter of the Internet. A value of zero in the router advertisement indicates that the advertisement isn't specifying a value for curHopLimit. The default should be set to the value specified in the IANA web pages (www.iana.org) at the time of implementation." REFERENCE "RFC 2461 Section 6.2.1" ::= { ipv6RouterAdvertEntry 10 } ipv6RouterAdvertDefaultLifetime OBJECT-TYPE SYNTAX Unsigned32 (0|4..9000) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value to be placed in the router lifetime field of router advertisements sent from this interface. This value MUST be either 0 or between ipv6RouterAdvertMaxInterval and 9000 seconds. A value of zero indicates that the router is not to be used as a default router. The default is 3 * ipv6RouterAdvertMaxInterval." REFERENCE "RFC 2461 Section 6.2.1" ::= { ipv6RouterAdvertEntry 11 } ipv6RouterAdvertRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row. As all objects in this conceptual row have default values, a row can be created and made active by setting this object appropriately. The RowStatus TC requires that this DESCRIPTION clause states under which circumstances other objects in this row can be modified. The value of this object has no effect on whether other objects in this conceptual row can be modified." ::= { ipv6RouterAdvertEntry 12 } -- -- ICMP section -- icmp OBJECT IDENTIFIER ::= { mib-2 5 } -- -- ICMP non-message-specific counters -- -- These object IDs are reserved, as they were used in earlier -- versions of the MIB module. In theory, OIDs are not assigned -- until the specification is released as an RFC; however, as some -- companies may have shipped code based on earlier versions of -- the MIB, it seems best to reserve these OIDs. -- ::= { icmp 27 } -- ::= { icmp 28 } icmpStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF IcmpStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of generic system-wide ICMP counters." ::= { icmp 29 } icmpStatsEntry OBJECT-TYPE SYNTAX IcmpStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the icmpStatsTable." INDEX { icmpStatsIPVersion } ::= { icmpStatsTable 1 } IcmpStatsEntry ::= SEQUENCE { icmpStatsIPVersion InetVersion, icmpStatsInMsgs Counter32, icmpStatsInErrors Counter32, icmpStatsOutMsgs Counter32, icmpStatsOutErrors Counter32 } icmpStatsIPVersion OBJECT-TYPE SYNTAX InetVersion MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP version of the statistics." ::= { icmpStatsEntry 1 } icmpStatsInMsgs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of ICMP messages that the entity received. Note that this counter includes all those counted by icmpStatsInErrors." ::= { icmpStatsEntry 2 } icmpStatsInErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of ICMP messages that the entity received but determined as having ICMP-specific errors (bad ICMP checksums, bad length, etc.)." ::= { icmpStatsEntry 3 } icmpStatsOutMsgs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of ICMP messages that the entity attempted to send. Note that this counter includes all those counted by icmpStatsOutErrors." ::= { icmpStatsEntry 4 } icmpStatsOutErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of ICMP messages that this entity did not send due to problems discovered within ICMP, such as a lack of buffers. This value should not include errors discovered outside the ICMP layer, such as the inability of IP to route the resultant datagram. In some implementations, there may be no types of error that contribute to this counter's value." ::= { icmpStatsEntry 5 } -- -- per-version, per-message type ICMP counters -- icmpMsgStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF IcmpMsgStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of system-wide per-version, per-message type ICMP counters." ::= { icmp 30 } icmpMsgStatsEntry OBJECT-TYPE SYNTAX IcmpMsgStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the icmpMsgStatsTable. The system should track each ICMP type value, even if that ICMP type is not supported by the system. However, a given row need not be instantiated unless a message of that type has been processed, i.e., the row for icmpMsgStatsType=X MAY be instantiated before but MUST be instantiated after the first message with Type=X is received or transmitted. After receiving or transmitting any succeeding messages with Type=X, the relevant counter must be incremented." INDEX { icmpMsgStatsIPVersion, icmpMsgStatsType } ::= { icmpMsgStatsTable 1 } IcmpMsgStatsEntry ::= SEQUENCE { icmpMsgStatsIPVersion InetVersion, icmpMsgStatsType Integer32, icmpMsgStatsInPkts Counter32, icmpMsgStatsOutPkts Counter32 } icmpMsgStatsIPVersion OBJECT-TYPE SYNTAX InetVersion MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP version of the statistics." ::= { icmpMsgStatsEntry 1 } icmpMsgStatsType OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ICMP type field of the message type being counted by this row. Note that ICMP message types are scoped by the address type in use." REFERENCE "http://www.iana.org/assignments/icmp-parameters and http://www.iana.org/assignments/icmpv6-parameters" ::= { icmpMsgStatsEntry 2 } icmpMsgStatsInPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of input packets for this AF and type." ::= { icmpMsgStatsEntry 3 } icmpMsgStatsOutPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of output packets for this AF and type." ::= { icmpMsgStatsEntry 4 } -- -- conformance information -- ipMIBConformance OBJECT IDENTIFIER ::= { ipMIB 2 } ipMIBCompliances OBJECT IDENTIFIER ::= { ipMIBConformance 1 } ipMIBGroups OBJECT IDENTIFIER ::= { ipMIBConformance 2 } -- compliance statements ipMIBCompliance2 MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for systems that implement IP - either IPv4 or IPv6. There are a number of INDEX objects that cannot be represented in the form of OBJECT clauses in SMIv2, but for which we have the following compliance requirements, expressed in OBJECT clause form in this description clause: -- OBJECT ipSystemStatsIPVersion -- SYNTAX InetVersion {ipv4(1), ipv6(2)} -- DESCRIPTION -- This MIB requires support for only IPv4 and IPv6 -- versions. -- -- OBJECT ipIfStatsIPVersion -- SYNTAX InetVersion {ipv4(1), ipv6(2)} -- DESCRIPTION -- This MIB requires support for only IPv4 and IPv6 -- versions. -- -- OBJECT icmpStatsIPVersion -- SYNTAX InetVersion {ipv4(1), ipv6(2)} -- DESCRIPTION -- This MIB requires support for only IPv4 and IPv6 -- versions. -- -- OBJECT icmpMsgStatsIPVersion -- SYNTAX InetVersion {ipv4(1), ipv6(2)} -- DESCRIPTION -- This MIB requires support for only IPv4 and IPv6 -- versions. -- -- OBJECT ipAddressPrefixType -- SYNTAX InetAddressType {ipv4(1), ipv6(2)} -- DESCRIPTION -- This MIB requires support for only global IPv4 and -- IPv6 address types. -- -- OBJECT ipAddressPrefixPrefix -- SYNTAX InetAddress (Size(4 | 16)) -- DESCRIPTION -- This MIB requires support for only global IPv4 and -- IPv6 addresses and so the size can be either 4 or -- 16 bytes. -- -- OBJECT ipAddressAddrType -- SYNTAX InetAddressType {ipv4(1), ipv6(2), -- ipv4z(3), ipv6z(4)} -- DESCRIPTION -- This MIB requires support for only global and -- non-global IPv4 and IPv6 address types. -- -- OBJECT ipAddressAddr -- SYNTAX InetAddress (Size(4 | 8 | 16 | 20)) -- DESCRIPTION -- This MIB requires support for only global and -- non-global IPv4 and IPv6 addresses and so the size -- can be 4, 8, 16, or 20 bytes. -- -- OBJECT ipNetToPhysicalNetAddressType -- SYNTAX InetAddressType {ipv4(1), ipv6(2), -- ipv4z(3), ipv6z(4)} -- DESCRIPTION -- This MIB requires support for only global and -- non-global IPv4 and IPv6 address types. -- -- OBJECT ipNetToPhysicalNetAddress -- SYNTAX InetAddress (Size(4 | 8 | 16 | 20)) -- DESCRIPTION -- This MIB requires support for only global and -- non-global IPv4 and IPv6 addresses and so the size -- can be 4, 8, 16, or 20 bytes. -- -- OBJECT ipDefaultRouterAddressType -- SYNTAX InetAddressType {ipv4(1), ipv6(2), -- ipv4z(3), ipv6z(4)} -- DESCRIPTION -- This MIB requires support for only global and -- non-global IPv4 and IPv6 address types. -- -- OBJECT ipDefaultRouterAddress -- SYNTAX InetAddress (Size(4 | 8 | 16 | 20)) -- DESCRIPTION -- This MIB requires support for only global and -- non-global IPv4 and IPv6 addresses and so the size -- can be 4, 8, 16, or 20 bytes." MODULE -- this module MANDATORY-GROUPS { ipSystemStatsGroup, ipAddressGroup, ipNetToPhysicalGroup, ipDefaultRouterGroup, icmpStatsGroup } GROUP ipSystemStatsHCOctetGroup DESCRIPTION "This group is mandatory for systems that have an aggregate bandwidth of greater than 20MB. Including this group does not allow an entity to neglect the 32 bit versions of these objects." GROUP ipSystemStatsHCPacketGroup DESCRIPTION "This group is mandatory for systems that have an aggregate bandwidth of greater than 650MB. Including this group does not allow an entity to neglect the 32 bit versions of these objects." GROUP ipIfStatsGroup DESCRIPTION "This group is optional for all systems." GROUP ipIfStatsHCOctetGroup DESCRIPTION "This group is mandatory for systems that include the ipIfStatsGroup and include links with bandwidths of greater than 20MB. Including this group does not allow an entity to neglect the 32 bit versions of these objects." GROUP ipIfStatsHCPacketGroup DESCRIPTION "This group is mandatory for systems that include the ipIfStatsGroup and include links with bandwidths of greater than 650MB. Including this group does not allow an entity to neglect the 32 bit versions of these objects." GROUP ipv4GeneralGroup DESCRIPTION "This group is mandatory for all systems supporting IPv4." GROUP ipv4IfGroup DESCRIPTION "This group is mandatory for all systems supporting IPv4." GROUP ipv4SystemStatsGroup DESCRIPTION "This group is mandatory for all systems supporting IPv4." GROUP ipv4SystemStatsHCPacketGroup DESCRIPTION "This group is mandatory for all systems supporting IPv4 and that have an aggregate bandwidth of greater than 650MB. Including this group does not allow an entity to neglect the 32 bit versions of these objects." GROUP ipv4IfStatsGroup DESCRIPTION "This group is mandatory for all systems supporting IPv4 and including the ipIfStatsGroup." GROUP ipv4IfStatsHCPacketGroup DESCRIPTION "This group is mandatory for all systems supporting IPv4 and including the ipIfStatsHCPacketGroup. Including this group does not allow an entity to neglect the 32 bit versions of these objects." GROUP ipv6GeneralGroup2 DESCRIPTION "This group is mandatory for all systems supporting IPv6." GROUP ipv6IfGroup DESCRIPTION "This group is mandatory for all systems supporting IPv6." GROUP ipAddressPrefixGroup DESCRIPTION "This group is mandatory for all systems supporting IPv6." GROUP ipv6ScopeGroup DESCRIPTION "This group is mandatory for all systems supporting IPv6." GROUP ipv6RouterAdvertGroup DESCRIPTION "This group is mandatory for all IPv6 routers." GROUP ipLastChangeGroup DESCRIPTION "This group is optional for all agents." OBJECT ipv6IpForwarding MIN-ACCESS read-only DESCRIPTION "An agent is not required to provide write access to this object." OBJECT ipv6IpDefaultHopLimit MIN-ACCESS read-only DESCRIPTION "An agent is not required to provide write access to this object." OBJECT ipv4InterfaceEnableStatus MIN-ACCESS read-only DESCRIPTION "An agent is not required to provide write access to this object." OBJECT ipv6InterfaceEnableStatus MIN-ACCESS read-only DESCRIPTION "An agent is not required to provide write access to this object." OBJECT ipv6InterfaceForwarding MIN-ACCESS read-only DESCRIPTION "An agent is not required to provide write access to this object." OBJECT ipAddressSpinLock MIN-ACCESS not-accessible DESCRIPTION "An agent is not required to provide write access to this object. However, if an agent provides write access to any of the other objects in the ipAddressGroup, it SHOULD provide write access to this object as well." OBJECT ipAddressIfIndex MIN-ACCESS read-only DESCRIPTION "An agent is not required to provide write or create access to this object." OBJECT ipAddressType MIN-ACCESS read-only DESCRIPTION "An agent is not required to provide write or create access to this object." OBJECT ipAddressStatus MIN-ACCESS read-only DESCRIPTION "An agent is not required to provide write or create access to this object." OBJECT ipAddressRowStatus SYNTAX RowStatus { active(1) } MIN-ACCESS read-only DESCRIPTION "An agent is not required to provide write or create access to this object." OBJECT ipAddressStorageType MIN-ACCESS read-only DESCRIPTION "An agent is not required to provide write or create access to this object. If an agent allows this object to be written or created, it is not required to allow this object to be set to readOnly, permanent, or nonVolatile." OBJECT ipNetToPhysicalPhysAddress MIN-ACCESS read-only DESCRIPTION "An agent is not required to provide write or create access to this object." OBJECT ipNetToPhysicalType MIN-ACCESS read-only DESCRIPTION "An agent is not required to provide write or create access to this object." OBJECT ipv6RouterAdvertSpinLock MIN-ACCESS read-only DESCRIPTION "An agent is not required to provide write access to this object. However, if an agent provides write access to any of the other objects in the ipv6RouterAdvertGroup, it SHOULD provide write access to this object as well." OBJECT ipv6RouterAdvertSendAdverts MIN-ACCESS read-only DESCRIPTION "An agent is not required to provide write access to this object." OBJECT ipv6RouterAdvertMaxInterval MIN-ACCESS read-only DESCRIPTION "An agent is not required to provide write access to this object." OBJECT ipv6RouterAdvertMinInterval MIN-ACCESS read-only DESCRIPTION "An agent is not required to provide write access to this object." OBJECT ipv6RouterAdvertManagedFlag MIN-ACCESS read-only DESCRIPTION "An agent is not required to provide write access to this object." OBJECT ipv6RouterAdvertOtherConfigFlag MIN-ACCESS read-only DESCRIPTION "An agent is not required to provide write access to this object." OBJECT ipv6RouterAdvertLinkMTU MIN-ACCESS read-only DESCRIPTION "An agent is not required to provide write access to this object." OBJECT ipv6RouterAdvertReachableTime MIN-ACCESS read-only DESCRIPTION "An agent is not required to provide write access to this object." OBJECT ipv6RouterAdvertRetransmitTime MIN-ACCESS read-only DESCRIPTION "An agent is not required to provide write access to this object." OBJECT ipv6RouterAdvertCurHopLimit MIN-ACCESS read-only DESCRIPTION "An agent is not required to provide write access to this object." OBJECT ipv6RouterAdvertDefaultLifetime MIN-ACCESS read-only DESCRIPTION "An agent is not required to provide write access to this object." OBJECT ipv6RouterAdvertRowStatus MIN-ACCESS read-only DESCRIPTION "An agent is not required to provide write or create access to this object." ::= { ipMIBCompliances 2 } -- units of conformance ipv4GeneralGroup OBJECT-GROUP OBJECTS { ipForwarding, ipDefaultTTL, ipReasmTimeout } STATUS current DESCRIPTION "The group of IPv4-specific objects for basic management of IPv4 entities." ::= { ipMIBGroups 3 } ipv4IfGroup OBJECT-GROUP OBJECTS { ipv4InterfaceReasmMaxSize, ipv4InterfaceEnableStatus, ipv4InterfaceRetransmitTime } STATUS current DESCRIPTION "The group of IPv4-specific objects for basic management of IPv4 interfaces." ::= { ipMIBGroups 4 } ipv6GeneralGroup2 OBJECT-GROUP OBJECTS { ipv6IpForwarding, ipv6IpDefaultHopLimit } STATUS current DESCRIPTION "The IPv6 group of objects providing for basic management of IPv6 entities." ::= { ipMIBGroups 5 } ipv6IfGroup OBJECT-GROUP OBJECTS { ipv6InterfaceReasmMaxSize, ipv6InterfaceIdentifier, ipv6InterfaceEnableStatus, ipv6InterfaceReachableTime, ipv6InterfaceRetransmitTime, ipv6InterfaceForwarding } STATUS current DESCRIPTION "The group of IPv6-specific objects for basic management of IPv6 interfaces." ::= { ipMIBGroups 6 } ipLastChangeGroup OBJECT-GROUP OBJECTS { ipv4InterfaceTableLastChange, ipv6InterfaceTableLastChange, ipIfStatsTableLastChange } STATUS current DESCRIPTION "The last change objects associated with this MIB. These objects are optional for all agents. They SHOULD be implemented on agents where it is possible to determine the proper values. Where it is not possible to determine the proper values, for example when the tables are split amongst several sub-agents using AgentX, the agent MUST NOT implement these objects to return an incorrect or static value." ::= { ipMIBGroups 7 } ipSystemStatsGroup OBJECT-GROUP OBJECTS { ipSystemStatsInReceives, ipSystemStatsInOctets, ipSystemStatsInHdrErrors, ipSystemStatsInNoRoutes, ipSystemStatsInAddrErrors, ipSystemStatsInUnknownProtos, ipSystemStatsInTruncatedPkts, ipSystemStatsInForwDatagrams, ipSystemStatsReasmReqds, ipSystemStatsReasmOKs, ipSystemStatsReasmFails, ipSystemStatsInDiscards, ipSystemStatsInDelivers, ipSystemStatsOutRequests, ipSystemStatsOutNoRoutes, ipSystemStatsOutForwDatagrams, ipSystemStatsOutDiscards, ipSystemStatsOutFragReqds, ipSystemStatsOutFragOKs, ipSystemStatsOutFragFails, ipSystemStatsOutFragCreates, ipSystemStatsOutTransmits, ipSystemStatsOutOctets, ipSystemStatsInMcastPkts, ipSystemStatsInMcastOctets, ipSystemStatsOutMcastPkts, ipSystemStatsOutMcastOctets, ipSystemStatsDiscontinuityTime, ipSystemStatsRefreshRate } STATUS current DESCRIPTION "IP system wide statistics." ::= { ipMIBGroups 8 } ipv4SystemStatsGroup OBJECT-GROUP OBJECTS { ipSystemStatsInBcastPkts, ipSystemStatsOutBcastPkts } STATUS current DESCRIPTION "IPv4 only system wide statistics." ::= { ipMIBGroups 9 } ipSystemStatsHCOctetGroup OBJECT-GROUP OBJECTS { ipSystemStatsHCInOctets, ipSystemStatsHCOutOctets, ipSystemStatsHCInMcastOctets, ipSystemStatsHCOutMcastOctets } STATUS current DESCRIPTION "IP system wide statistics for systems that may overflow the standard octet counters within 1 hour." ::= { ipMIBGroups 10 } ipSystemStatsHCPacketGroup OBJECT-GROUP OBJECTS { ipSystemStatsHCInReceives, ipSystemStatsHCInForwDatagrams, ipSystemStatsHCInDelivers, ipSystemStatsHCOutRequests, ipSystemStatsHCOutForwDatagrams, ipSystemStatsHCOutTransmits, ipSystemStatsHCInMcastPkts, ipSystemStatsHCOutMcastPkts } STATUS current DESCRIPTION "IP system wide statistics for systems that may overflow the standard packet counters within 1 hour." ::= { ipMIBGroups 11 } ipv4SystemStatsHCPacketGroup OBJECT-GROUP OBJECTS { ipSystemStatsHCInBcastPkts, ipSystemStatsHCOutBcastPkts } STATUS current DESCRIPTION "IPv4 only system wide statistics for systems that may overflow the standard packet counters within 1 hour." ::= { ipMIBGroups 12 } ipIfStatsGroup OBJECT-GROUP OBJECTS { ipIfStatsInReceives, ipIfStatsInOctets, ipIfStatsInHdrErrors, ipIfStatsInNoRoutes, ipIfStatsInAddrErrors, ipIfStatsInUnknownProtos, ipIfStatsInTruncatedPkts, ipIfStatsInForwDatagrams, ipIfStatsReasmReqds, ipIfStatsReasmOKs, ipIfStatsReasmFails, ipIfStatsInDiscards, ipIfStatsInDelivers, ipIfStatsOutRequests, ipIfStatsOutForwDatagrams, ipIfStatsOutDiscards, ipIfStatsOutFragReqds, ipIfStatsOutFragOKs, ipIfStatsOutFragFails, ipIfStatsOutFragCreates, ipIfStatsOutTransmits, ipIfStatsOutOctets, ipIfStatsInMcastPkts, ipIfStatsInMcastOctets, ipIfStatsOutMcastPkts, ipIfStatsOutMcastOctets, ipIfStatsDiscontinuityTime, ipIfStatsRefreshRate } STATUS current DESCRIPTION "IP per-interface statistics." ::= { ipMIBGroups 13 } ipv4IfStatsGroup OBJECT-GROUP OBJECTS { ipIfStatsInBcastPkts, ipIfStatsOutBcastPkts } STATUS current DESCRIPTION "IPv4 only per-interface statistics." ::= { ipMIBGroups 14 } ipIfStatsHCOctetGroup OBJECT-GROUP OBJECTS { ipIfStatsHCInOctets, ipIfStatsHCOutOctets, ipIfStatsHCInMcastOctets, ipIfStatsHCOutMcastOctets } STATUS current DESCRIPTION "IP per-interfaces statistics for systems that include interfaces that may overflow the standard octet counters within 1 hour." ::= { ipMIBGroups 15 } ipIfStatsHCPacketGroup OBJECT-GROUP OBJECTS { ipIfStatsHCInReceives, ipIfStatsHCInForwDatagrams, ipIfStatsHCInDelivers, ipIfStatsHCOutRequests, ipIfStatsHCOutForwDatagrams, ipIfStatsHCOutTransmits, ipIfStatsHCInMcastPkts, ipIfStatsHCOutMcastPkts } STATUS current DESCRIPTION "IP per-interfaces statistics for systems that include interfaces that may overflow the standard packet counters within 1 hour." ::= { ipMIBGroups 16 } ipv4IfStatsHCPacketGroup OBJECT-GROUP OBJECTS { ipIfStatsHCInBcastPkts, ipIfStatsHCOutBcastPkts } STATUS current DESCRIPTION "IPv4 only per-interface statistics for systems that include interfaces that may overflow the standard packet counters within 1 hour." ::= { ipMIBGroups 17 } ipAddressPrefixGroup OBJECT-GROUP OBJECTS { ipAddressPrefixOrigin, ipAddressPrefixOnLinkFlag, ipAddressPrefixAutonomousFlag, ipAddressPrefixAdvPreferredLifetime, ipAddressPrefixAdvValidLifetime } STATUS current DESCRIPTION "The group of objects for providing information about address prefixes used by this node." ::= { ipMIBGroups 18 } ipAddressGroup OBJECT-GROUP OBJECTS { ipAddressSpinLock, ipAddressIfIndex, ipAddressType, ipAddressPrefix, ipAddressOrigin, ipAddressStatus, ipAddressCreated, ipAddressLastChanged, ipAddressRowStatus, ipAddressStorageType } STATUS current DESCRIPTION "The group of objects for providing information about the addresses relevant to this entity's interfaces." ::= { ipMIBGroups 19 } ipNetToPhysicalGroup OBJECT-GROUP OBJECTS { ipNetToPhysicalPhysAddress, ipNetToPhysicalLastUpdated, ipNetToPhysicalType, ipNetToPhysicalState, ipNetToPhysicalRowStatus } STATUS current DESCRIPTION "The group of objects for providing information about the mappings of network address to physical address known to this node." ::= { ipMIBGroups 20 } ipv6ScopeGroup OBJECT-GROUP OBJECTS { ipv6ScopeZoneIndexLinkLocal, ipv6ScopeZoneIndex3, ipv6ScopeZoneIndexAdminLocal, ipv6ScopeZoneIndexSiteLocal, ipv6ScopeZoneIndex6, ipv6ScopeZoneIndex7, ipv6ScopeZoneIndexOrganizationLocal, ipv6ScopeZoneIndex9, ipv6ScopeZoneIndexA, ipv6ScopeZoneIndexB, ipv6ScopeZoneIndexC, ipv6ScopeZoneIndexD } STATUS current DESCRIPTION "The group of objects for managing IPv6 scope zones." ::= { ipMIBGroups 21 } ipDefaultRouterGroup OBJECT-GROUP OBJECTS { ipDefaultRouterLifetime, ipDefaultRouterPreference } STATUS current DESCRIPTION "The group of objects for providing information about default routers known to this node." ::= { ipMIBGroups 22 } ipv6RouterAdvertGroup OBJECT-GROUP OBJECTS { ipv6RouterAdvertSpinLock, ipv6RouterAdvertSendAdverts, ipv6RouterAdvertMaxInterval, ipv6RouterAdvertMinInterval, ipv6RouterAdvertManagedFlag, ipv6RouterAdvertOtherConfigFlag, ipv6RouterAdvertLinkMTU, ipv6RouterAdvertReachableTime, ipv6RouterAdvertRetransmitTime, ipv6RouterAdvertCurHopLimit, ipv6RouterAdvertDefaultLifetime, ipv6RouterAdvertRowStatus } STATUS current DESCRIPTION "The group of objects for controlling information advertised by IPv6 routers." ::= { ipMIBGroups 23 } icmpStatsGroup OBJECT-GROUP OBJECTS {icmpStatsInMsgs, icmpStatsInErrors, icmpStatsOutMsgs, icmpStatsOutErrors, icmpMsgStatsInPkts, icmpMsgStatsOutPkts } STATUS current DESCRIPTION "The group of objects providing ICMP statistics." ::= { ipMIBGroups 24 } -- -- Deprecated objects -- ipInReceives OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The total number of input datagrams received from interfaces, including those received in error. This object has been deprecated, as a new IP version-neutral table has been added. It is loosely replaced by ipSystemStatsInRecieves." ::= { ip 3 } ipInHdrErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The number of input datagrams discarded due to errors in their IPv4 headers, including bad checksums, version number mismatch, other format errors, time-to-live exceeded, errors discovered in processing their IPv4 options, etc. This object has been deprecated as a new IP version-neutral table has been added. It is loosely replaced by ipSystemStatsInHdrErrors." ::= { ip 4 } ipInAddrErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The number of input datagrams discarded because the IPv4 address in their IPv4 header's destination field was not a valid address to be received at this entity. This count includes invalid addresses (e.g., 0.0.0.0) and addresses of unsupported Classes (e.g., Class E). For entities which are not IPv4 routers, and therefore do not forward datagrams, this counter includes datagrams discarded because the destination address was not a local address. This object has been deprecated, as a new IP version-neutral table has been added. It is loosely replaced by ipSystemStatsInAddrErrors." ::= { ip 5 } ipForwDatagrams OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The number of input datagrams for which this entity was not their final IPv4 destination, as a result of which an attempt was made to find a route to forward them to that final destination. In entities which do not act as IPv4 routers, this counter will include only those packets which were Source-Routed via this entity, and the Source-Route option processing was successful. This object has been deprecated, as a new IP version-neutral table has been added. It is loosely replaced by ipSystemStatsInForwDatagrams." ::= { ip 6 } ipInUnknownProtos OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The number of locally-addressed datagrams received successfully but discarded because of an unknown or unsupported protocol. This object has been deprecated, as a new IP version-neutral table has been added. It is loosely replaced by ipSystemStatsInUnknownProtos." ::= { ip 7 } ipInDiscards OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The number of input IPv4 datagrams for which no problems were encountered to prevent their continued processing, but which were discarded (e.g., for lack of buffer space). Note that this counter does not include any datagrams discarded while awaiting re-assembly. This object has been deprecated, as a new IP version-neutral table has been added. It is loosely replaced by ipSystemStatsInDiscards." ::= { ip 8 } ipInDelivers OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The total number of input datagrams successfully delivered to IPv4 user-protocols (including ICMP). This object has been deprecated as a new IP version neutral table has been added. It is loosely replaced by ipSystemStatsIndelivers." ::= { ip 9 } ipOutRequests OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The total number of IPv4 datagrams which local IPv4 user protocols (including ICMP) supplied to IPv4 in requests for transmission. Note that this counter does not include any datagrams counted in ipForwDatagrams. This object has been deprecated, as a new IP version-neutral table has been added. It is loosely replaced by ipSystemStatsOutRequests." ::= { ip 10 } ipOutDiscards OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The number of output IPv4 datagrams for which no problem was encountered to prevent their transmission to their destination, but which were discarded (e.g., for lack of buffer space). Note that this counter would include datagrams counted in ipForwDatagrams if any such packets met this (discretionary) discard criterion. This object has been deprecated, as a new IP version-neutral table has been added. It is loosely replaced by ipSystemStatsOutDiscards." ::= { ip 11 } ipOutNoRoutes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The number of IPv4 datagrams discarded because no route could be found to transmit them to their destination. Note that this counter includes any packets counted in ipForwDatagrams which meet this `no-route' criterion. Note that this includes any datagrams which a host cannot route because all of its default routers are down. This object has been deprecated, as a new IP version-neutral table has been added. It is loosely replaced by ipSystemStatsOutNoRoutes." ::= { ip 12 } ipReasmReqds OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The number of IPv4 fragments received which needed to be reassembled at this entity. This object has been deprecated, as a new IP version-neutral table has been added. It is loosely replaced by ipSystemStatsReasmReqds." ::= { ip 14 } ipReasmOKs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The number of IPv4 datagrams successfully re-assembled. This object has been deprecated, as a new IP version-neutral table has been added. It is loosely replaced by ipSystemStatsReasmOKs." ::= { ip 15 } ipReasmFails OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The number of failures detected by the IPv4 re-assembly algorithm (for whatever reason: timed out, errors, etc). Note that this is not necessarily a count of discarded IPv4 fragments since some algorithms (notably the algorithm in RFC 815) can lose track of the number of fragments by combining them as they are received. This object has been deprecated, as a new IP version-neutral table has been added. It is loosely replaced by ipSystemStatsReasmFails." ::= { ip 16 } ipFragOKs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The number of IPv4 datagrams that have been successfully fragmented at this entity. This object has been deprecated, as a new IP version-neutral table has been added. It is loosely replaced by ipSystemStatsOutFragOKs." ::= { ip 17 } ipFragFails OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The number of IPv4 datagrams that have been discarded because they needed to be fragmented at this entity but could not be, e.g., because their Don't Fragment flag was set. This object has been deprecated, as a new IP version-neutral table has been added. It is loosely replaced by ipSystemStatsOutFragFails." ::= { ip 18 } ipFragCreates OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The number of IPv4 datagram fragments that have been generated as a result of fragmentation at this entity. This object has been deprecated as a new IP version neutral table has been added. It is loosely replaced by ipSystemStatsOutFragCreates." ::= { ip 19 } ipRoutingDiscards OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The number of routing entries which were chosen to be discarded even though they are valid. One possible reason for discarding such an entry could be to free-up buffer space for other routing entries. This object was defined in pre-IPv6 versions of the IP MIB. It was implicitly IPv4 only, but the original specifications did not indicate this protocol restriction. In order to clarify the specifications, this object has been deprecated and a similar, but more thoroughly clarified, object has been added to the IP-FORWARD-MIB." ::= { ip 23 } -- the deprecated IPv4 address table ipAddrTable OBJECT-TYPE SYNTAX SEQUENCE OF IpAddrEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "The table of addressing information relevant to this entity's IPv4 addresses. This table has been deprecated, as a new IP version-neutral table has been added. It is loosely replaced by the ipAddressTable although several objects that weren't deemed useful weren't carried forward while another (ipAdEntReasmMaxSize) was moved to the ipv4InterfaceTable." ::= { ip 20 } ipAddrEntry OBJECT-TYPE SYNTAX IpAddrEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "The addressing information for one of this entity's IPv4 addresses." INDEX { ipAdEntAddr } ::= { ipAddrTable 1 } IpAddrEntry ::= SEQUENCE { ipAdEntAddr IpAddress, ipAdEntIfIndex INTEGER, ipAdEntNetMask IpAddress, ipAdEntBcastAddr INTEGER, ipAdEntReasmMaxSize INTEGER } ipAdEntAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The IPv4 address to which this entry's addressing information pertains." ::= { ipAddrEntry 1 } ipAdEntIfIndex OBJECT-TYPE SYNTAX INTEGER (1..2147483647) MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of the IF-MIB's ifIndex." ::= { ipAddrEntry 2 } ipAdEntNetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The subnet mask associated with the IPv4 address of this entry. The value of the mask is an IPv4 address with all the network bits set to 1 and all the hosts bits set to 0." ::= { ipAddrEntry 3 } ipAdEntBcastAddr OBJECT-TYPE SYNTAX INTEGER (0..1) MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The value of the least-significant bit in the IPv4 broadcast address used for sending datagrams on the (logical) interface associated with the IPv4 address of this entry. For example, when the Internet standard all-ones broadcast address is used, the value will be 1. This value applies to both the subnet and network broadcast addresses used by the entity on this (logical) interface." ::= { ipAddrEntry 4 } ipAdEntReasmMaxSize OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The size of the largest IPv4 datagram which this entity can re-assemble from incoming IPv4 fragmented datagrams received on this interface." ::= { ipAddrEntry 5 } -- the deprecated IPv4 Address Translation table -- The Address Translation tables contain the IpAddress to -- "physical" address equivalences. Some interfaces do not -- use translation tables for determining address -- equivalences (e.g., DDN-X.25 has an algorithmic method); -- if all interfaces are of this type, then the Address -- Translation table is empty, i.e., has zero entries. ipNetToMediaTable OBJECT-TYPE SYNTAX SEQUENCE OF IpNetToMediaEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "The IPv4 Address Translation table used for mapping from IPv4 addresses to physical addresses. This table has been deprecated, as a new IP version-neutral table has been added. It is loosely replaced by the ipNetToPhysicalTable." ::= { ip 22 } ipNetToMediaEntry OBJECT-TYPE SYNTAX IpNetToMediaEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "Each entry contains one IpAddress to `physical' address equivalence." INDEX { ipNetToMediaIfIndex, ipNetToMediaNetAddress } ::= { ipNetToMediaTable 1 } IpNetToMediaEntry ::= SEQUENCE { ipNetToMediaIfIndex INTEGER, ipNetToMediaPhysAddress PhysAddress, ipNetToMediaNetAddress IpAddress, ipNetToMediaType INTEGER } ipNetToMediaIfIndex OBJECT-TYPE SYNTAX INTEGER (1..2147483647) MAX-ACCESS read-create STATUS deprecated DESCRIPTION "The interface on which this entry's equivalence is effective. The interface identified by a particular value of this index is the same interface as identified by the same value of the IF-MIB's ifIndex. This object predates the rule limiting index objects to a max access value of 'not-accessible' and so continues to use a value of 'read-create'." ::= { ipNetToMediaEntry 1 } ipNetToMediaPhysAddress OBJECT-TYPE SYNTAX PhysAddress (SIZE(0..65535)) MAX-ACCESS read-create STATUS deprecated DESCRIPTION "The media-dependent `physical' address. This object should return 0 when this entry is in the 'incomplete' state. As the entries in this table are typically not persistent when this object is written the entity should not save the change to non-volatile storage. Note: a stronger requirement is not used because this object was previously defined." ::= { ipNetToMediaEntry 2 } ipNetToMediaNetAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS deprecated DESCRIPTION "The IpAddress corresponding to the media-dependent `physical' address. This object predates the rule limiting index objects to a max access value of 'not-accessible' and so continues to use a value of 'read-create'." ::= { ipNetToMediaEntry 3 } ipNetToMediaType OBJECT-TYPE SYNTAX INTEGER { other(1), -- none of the following invalid(2), -- an invalidated mapping dynamic(3), static(4) } MAX-ACCESS read-create STATUS deprecated DESCRIPTION "The type of mapping. Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the ipNetToMediaTable. That is, it effectively dis-associates the interface identified with said entry from the mapping identified with said entry. It is an implementation- specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive tabular information from agents that corresponds to entries not currently in use. Proper interpretation of such entries requires examination of the relevant ipNetToMediaType object. As the entries in this table are typically not persistent when this object is written the entity should not save the change to non-volatile storage. Note: a stronger requirement is not used because this object was previously defined." ::= { ipNetToMediaEntry 4 } -- the deprecated ICMP group icmpInMsgs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The total number of ICMP messages which the entity received. Note that this counter includes all those counted by icmpInErrors. This object has been deprecated, as a new IP version-neutral table has been added. It is loosely replaced by icmpStatsInMsgs." ::= { icmp 1 } icmpInErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The number of ICMP messages which the entity received but determined as having ICMP-specific errors (bad ICMP checksums, bad length, etc.). This object has been deprecated, as a new IP version-neutral table has been added. It is loosely replaced by icmpStatsInErrors." ::= { icmp 2 } icmpInDestUnreachs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The number of ICMP Destination Unreachable messages received. This object has been deprecated, as a new IP version-neutral table has been added. It is loosely replaced by a column in the icmpMsgStatsTable." ::= { icmp 3 } icmpInTimeExcds OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The number of ICMP Time Exceeded messages received. This object has been deprecated, as a new IP version-neutral table has been added. It is loosely replaced by a column in the icmpMsgStatsTable." ::= { icmp 4 } icmpInParmProbs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The number of ICMP Parameter Problem messages received. This object has been deprecated, as a new IP version-neutral table has been added. It is loosely replaced by a column in the icmpMsgStatsTable." ::= { icmp 5 } icmpInSrcQuenchs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The number of ICMP Source Quench messages received. This object has been deprecated, as a new IP version-neutral table has been added. It is loosely replaced by a column in the icmpMsgStatsTable." ::= { icmp 6 } icmpInRedirects OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The number of ICMP Redirect messages received. This object has been deprecated, as a new IP version-neutral table has been added. It is loosely replaced by a column in the icmpMsgStatsTable." ::= { icmp 7 } icmpInEchos OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The number of ICMP Echo (request) messages received. This object has been deprecated, as a new IP version-neutral table has been added. It is loosely replaced by a column in the icmpMsgStatsTable." ::= { icmp 8 } icmpInEchoReps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The number of ICMP Echo Reply messages received. This object has been deprecated, as a new IP version-neutral table has been added. It is loosely replaced by a column in the icmpMsgStatsTable." ::= { icmp 9 } icmpInTimestamps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The number of ICMP Timestamp (request) messages received. This object has been deprecated, as a new IP version-neutral table has been added. It is loosely replaced by a column in the icmpMsgStatsTable." ::= { icmp 10 } icmpInTimestampReps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The number of ICMP Timestamp Reply messages received. This object has been deprecated, as a new IP version-neutral table has been added. It is loosely replaced by a column in the icmpMsgStatsTable." ::= { icmp 11 } icmpInAddrMasks OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The number of ICMP Address Mask Request messages received. This object has been deprecated, as a new IP version-neutral table has been added. It is loosely replaced by a column in the icmpMsgStatsTable." ::= { icmp 12 } icmpInAddrMaskReps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The number of ICMP Address Mask Reply messages received. This object has been deprecated, as a new IP version-neutral table has been added. It is loosely replaced by a column in the icmpMsgStatsTable." ::= { icmp 13 } icmpOutMsgs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The total number of ICMP messages which this entity attempted to send. Note that this counter includes all those counted by icmpOutErrors. This object has been deprecated, as a new IP version-neutral table has been added. It is loosely replaced by icmpStatsOutMsgs." ::= { icmp 14 } icmpOutErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The number of ICMP messages which this entity did not send due to problems discovered within ICMP, such as a lack of buffers. This value should not include errors discovered outside the ICMP layer, such as the inability of IP to route the resultant datagram. In some implementations, there may be no types of error which contribute to this counter's value. This object has been deprecated, as a new IP version-neutral table has been added. It is loosely replaced by icmpStatsOutErrors." ::= { icmp 15 } icmpOutDestUnreachs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The number of ICMP Destination Unreachable messages sent. This object has been deprecated, as a new IP version-neutral table has been added. It is loosely replaced by a column in the icmpMsgStatsTable." ::= { icmp 16 } icmpOutTimeExcds OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The number of ICMP Time Exceeded messages sent. This object has been deprecated, as a new IP version-neutral table has been added. It is loosely replaced by a column in the icmpMsgStatsTable." ::= { icmp 17 } icmpOutParmProbs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The number of ICMP Parameter Problem messages sent. This object has been deprecated, as a new IP version-neutral table has been added. It is loosely replaced by a column in the icmpMsgStatsTable." ::= { icmp 18 } icmpOutSrcQuenchs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The number of ICMP Source Quench messages sent. This object has been deprecated, as a new IP version-neutral table has been added. It is loosely replaced by a column in the icmpMsgStatsTable." ::= { icmp 19 } icmpOutRedirects OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The number of ICMP Redirect messages sent. For a host, this object will always be zero, since hosts do not send redirects. This object has been deprecated, as a new IP version-neutral table has been added. It is loosely replaced by a column in the icmpMsgStatsTable." ::= { icmp 20 } icmpOutEchos OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The number of ICMP Echo (request) messages sent. This object has been deprecated, as a new IP version-neutral table has been added. It is loosely replaced by a column in the icmpMsgStatsTable." ::= { icmp 21 } icmpOutEchoReps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The number of ICMP Echo Reply messages sent. This object has been deprecated, as a new IP version-neutral table has been added. It is loosely replaced by a column in the icmpMsgStatsTable." ::= { icmp 22 } icmpOutTimestamps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The number of ICMP Timestamp (request) messages sent. This object has been deprecated, as a new IP version-neutral table has been added. It is loosely replaced by a column in the icmpMsgStatsTable." ::= { icmp 23 } icmpOutTimestampReps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The number of ICMP Timestamp Reply messages sent. This object has been deprecated, as a new IP version-neutral table has been added. It is loosely replaced by a column in the icmpMsgStatsTable." ::= { icmp 24 } icmpOutAddrMasks OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The number of ICMP Address Mask Request messages sent. This object has been deprecated, as a new IP version-neutral table has been added. It is loosely replaced by a column in the icmpMsgStatsTable." ::= { icmp 25 } icmpOutAddrMaskReps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The number of ICMP Address Mask Reply messages sent. This object has been deprecated, as a new IP version-neutral table has been added. It is loosely replaced by a column in the icmpMsgStatsTable." ::= { icmp 26 } -- deprecated conformance information -- deprecated compliance statements ipMIBCompliance MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "The compliance statement for systems that implement only IPv4. For version-independence, this compliance statement is deprecated in favor of ipMIBCompliance2." MODULE -- this module MANDATORY-GROUPS { ipGroup, icmpGroup } ::= { ipMIBCompliances 1 } -- deprecated units of conformance ipGroup OBJECT-GROUP OBJECTS { ipForwarding, ipDefaultTTL, ipInReceives, ipInHdrErrors, ipInAddrErrors, ipForwDatagrams, ipInUnknownProtos, ipInDiscards, ipInDelivers, ipOutRequests, ipOutDiscards, ipOutNoRoutes, ipReasmTimeout, ipReasmReqds, ipReasmOKs, ipReasmFails, ipFragOKs, ipFragFails, ipFragCreates, ipAdEntAddr, ipAdEntIfIndex, ipAdEntNetMask, ipAdEntBcastAddr, ipAdEntReasmMaxSize, ipNetToMediaIfIndex, ipNetToMediaPhysAddress, ipNetToMediaNetAddress, ipNetToMediaType, ipRoutingDiscards } STATUS deprecated DESCRIPTION "The ip group of objects providing for basic management of IP entities, exclusive of the management of IP routes. As part of the version independence, this group has been deprecated. " ::= { ipMIBGroups 1 } icmpGroup OBJECT-GROUP OBJECTS { icmpInMsgs, icmpInErrors, icmpInDestUnreachs, icmpInTimeExcds, icmpInParmProbs, icmpInSrcQuenchs, icmpInRedirects, icmpInEchos, icmpInEchoReps, icmpInTimestamps, icmpInTimestampReps, icmpInAddrMasks, icmpInAddrMaskReps, icmpOutMsgs, icmpOutErrors, icmpOutDestUnreachs, icmpOutTimeExcds, icmpOutParmProbs, icmpOutSrcQuenchs, icmpOutRedirects, icmpOutEchos, icmpOutEchoReps, icmpOutTimestamps, icmpOutTimestampReps, icmpOutAddrMasks, icmpOutAddrMaskReps } STATUS deprecated DESCRIPTION "The icmp group of objects providing ICMP statistics. As part of the version independence, this group has been deprecated. " ::= { ipMIBGroups 2 } END
Kaydet
Vazgeç